TPC 2026
TPC 2026

 

 

Navigation: Calibrating Data >

Reusing Calibrations

 

 

 

 

When you execute an operation that involves calibrations, TPC allows you to select an existing calibration.  Think of this as reusing an existing calibration.


Survey Calibrations

As you create new calibrations for a survey, TPC adds them to that surveys calibrations.

Having the survey store the calibrations used accomplishes two very important things

•it allows you to reuse the calibrations as often as needed

•it allows calibrated survey data and drawing objects to retain their individual calibrations so they can be Uncalibrated if needed


Select a Calibration

Calibration dialogs present a list of calibrations already used by the survey in Select a Calibration.

Select (highlight) the calibration you want to use.

The information for the selected calibration is displayed in  Calibration Information, so you can review each existing calibration and use the one you want.


Calibration Files

TPC stores calibrations in calibration files with the file extension .cal. When you select an existing calibration, you are actually just selecting a calibration file.

By default, each survey stores the calibration files for the calibrations it uses in its own survey data folder. So if your survey is in the \Job 101\ folder, that's where it will store it's .cal files be default.

Of course, you can also share calibration files with other surveys, so the calibration file used by a survey can also reside in a shared data folder on a network file server.


Calibrations and TRV Files

A survey's calibrations are also stored in their survey (TRV) files. If a survey is somehow separated from it's calibration (.cal) files, the calibration information stored with the survey in the TRV file is adequate to Uncalibrate, recalibrate or report the calibration of any calibrated survey data or drawing objects.


Related Topics

Calibrating Data

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.