TPC 2026
TPC 2026

 

 

Navigation: COGO >

Creating Corner Offsets

 

 

 

 

You can create two offsets (reference points) at each corner of a construction feature like a foundation or footing.

The offset points use the point label of the corner with the letters A and B appended (i.e. point 12 creates the offset points 12A and 12B). The corners you are offsetting must be in a traverse so that the traverse sequence can be used to generate the offsets.

The offset points are added to the traverse as side shots from each corner. The offset distances can then be edited in the Traverse View, creating offsets at varying distances.

 

COGO: Corner Offsets (4:18) - In this video, we compute 5' lot corner offsets to stake a foundation.


To Create Corner Offsets

•Go to the Traverse View for the traverse containing the foundation or footing, right click that traverse in the Traverses view or right click any object in the current drawing that is drawn by that traverse.

•Choose COGO | Corner Offsets.

•Use the What list to select the part of the traverse you want to compute offsets for.

•In the Corner Offsets dialog, enter the offset distance and choose Compute.

•To undo the offsets and completely remove them from the survey, choose Undo.

TPC computes the offsets and address them to the traverse. If the Traverse View for that traverse is open, you will see the offset points appear as side shots. If that traverse is tagged in the current drawing and side shots are turned on, you will see the offsets appear in the drawing.


Changing the Offset Distances

This routine creates all the offsets at the same distance. Because they are inserted into the traverse as side shots, you can easily change their offset distances. One way is to edit the side shot distances for the offset points in the Traverse View. Another is to right click the offset point you want to change in either the Traverse View or the drawing and choose COGO | Compute Coordinates.


Offsetting Multiple Traverses

If you have a number of traverses you want to offset, select them in the Traverses Manager then from the What list in the Corner Offsets dialog choose 'X Selected items in the Traverses Manager' where X is the number of traverses you selected. Corner offsets will be created for each selected traverse.


Grid vs Ground / Geodetic

Offsets are computed based on the distance type of each traverse.

For example, if a traverse is formatted for ground distance at project elevation, offset distances will be ground distance at project elevation.


Related Topics

Using COGO
COGO Commands

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.