The translation dialog box can be accessed both from the Traverses Manager, Traverse View, Points Manager or Drawing View. From the Traverses Manager it gives you the option to translate All Traverses or Selected Traverses. Accessed from the Traverse View or Points Manager, you can only translate All Points or Selected Points. Accessed from the Drawing View, you can only translate the Entire Survey.
There are four ways to specify a translation using this dialog box.
•Enter the amount to move in each direction using Coordinates: Y, X and Z.
•Enter the amount to move by specifying a bearing/azimuth and distance in Direction: Bearing and Distance. This is especially useful if you use equations for the values.
•Translate so that a particular point ends up at another known point that is at the correct position. Enter a To point that the From point will be translated to.
•Translate so that a particular point ends up at a specified coordinate. Enter the To: Y, X and Z that the From point will be translated to.
•From the Translate What box, choose Entire Survey.
•Choose OK.
Every point in the survey will be translated by the amounts shown in the Move Y, X and Z fields. Protected points will not be translated unless you choose [X] Protected points.
Translating Selected Traverses
•In the Traverses Manager, select the traverses you want to translate. Selecting traverses is a powerful feature of TPC.
This is because TPC provides the option to translate by distance and direction. Using this option, TPC computes a geodesic foresight that is the requested distance and direction from the point specified in the From field. The coordinated difference between these two points is the differential X, Y used for the translation.