TPC 2026
TPC 2026

 

 

Navigation: Coordinate Reference Systems >

CRS File Sytnax

 

 

 

 

Syntax for Traverse PC CRS (Coordinate Reference System) files


Description Record

Description,[any text used to describe this CRS]


Ellipse Record

Ellipse,[ellipse name]

Example: Ellipse,GRS 80

Predefined Ellipses: Clarke 1866, GRS 80, WGS 66, WGS 72, ATS 77, WGS 84


FileUnits Record

Units,[Feet/Meters],[factor to convert coordinated units to meters],[DMS/DEG]

Example: Units,Feet,0.30480060960122,DMS

 

All CRS files use the factor to convert to meters. Notice that when meters is used the factor is 1.0

DMS = degrees, minutes, seconds

DEG = decimal degrees


SurveyUnits Record

SurveyUnits,[USSF/IF]

Example: SurveyUnits,USSF

USSF = United States Survey Foot (1 meter = 39.37 inches) or (1 sft = 1200/3937 meter)

IF = International Foot (1 ft = 0.3048 meters)


Horizontal Datum Record

HorizontalDatum,[datum name and realization (optional)]

Example: HorizontalDatum,NAD 83 (2011) epoch 2010.00


Vertical Datum Record

VerticalDatum,[datum name]

Example: VerticalDatum,NAVD 88


Zone Records

Zone,... format depends on Projection type (see listings below)


Codes

Some zones have a unique code (usually a number) that identifies that zone.

TPC does not use these zone values internally, but does read / store / display them if included.

Codes can be blank as shown in the following line by "10,,1"

Zone,Alaska 10,,1,51.5,53.5,176,51,3000000,0


Projections

TPC currently supports the following projections

1 Lambert (2SP) Two Standard parallels

2 Transverse Mercator

3 Universal Transverse Mercator

4 Oblique Mercator

5 Lambert (1SP) One Standard parallels

6 Albers

If you need a different projection for your CRS, please contact TPC technical support: tech@traverse-pc.com.


Latitude / Longitude

longitude +west, -east. You can also add the letters E (east) and W (west) before or after a longitude.  This is the preferred method.

latitude +north, -south, zero=equator.  You can also add the letters N (north) and S (south) before or after a latitude.  This is the preferred method.

any latitude or longitude can be entered as a decimal angle by appending D or d (ie 15.12680916389d)


Projection 1: Lambert (2SP) Two Standard parallels

Example: Zone,Alaska 10,,1,51.5,53.5,176,51,3000000,0

 

Zone

State & Zone

code

projection (1 = Lambert (2SP))

south std parallel latitude

north std parallel latitude

origin longitude (cental meridian)

origin latitude

origin easting

origin northing


Projection 2: Transverse Mercator

Example: Zone,Arizona Central,,2,10000,111.55,31,500000,0

 

State & Zone

code

projection (2 = Transverse Mercator)

scale factor on central meridian

origin longitude (cental meridian)

origin latitude

origin easting

origin northing


Projection 3: Universal Transverse Mercator

Example: Zone,Arizona Central,,3,10000,111.55,31,500000,0

 

State & Zone

code

projection (3 = Universal Transverse Mercator)

scale factor on central meridian

origin longitude (cental meridian)

origin latitude

origin easting

origin northing


Projection 4: Oblique Mercator

Zone,Oregon Coast,6015,4,1,5,124.03,44.45,-300000,-4600000,1.0

 

State & Zone

code

projection (4 = Oblique Mercator)

scale factor along projection axis

positive skew axis (u axis) azimuth of local origin

origin longitude (cental meridian)

origin latitude

origin easting

origin northing

scale factor (currently unused)


Projection 5: Lambert (1SP) One Standard parallels

Example: Zone,Burnett County,6107,5,92.2728,45.5355373517,64008.1276,59445.9043,1.0000383841

 

State & Zone

code

projection (5 = Lambert (1SP))

origin longitude (cental meridian)

origin latitude

origin easting

origin northing

scale factor at origin


Projection 6: Albers (2SP) Twp Standard parallels

Example: Zone,Montana,,6,43.5,48,106.0,42.5,0,0

 

State & Zone

code

projection (6 = Albers (2SP))

south std parallel latitude

north std parallel latitude

origin longitude (cental meridian)

origin latitude

origin easting

origin northing

 

 

// note: TPC uses these default CRS file names (they should not be changed)

UTM Worldwide.crs

UTM North.crs

UTM South.crs

Canada UTM.crs

NAD 83 (2011).crs

NAD 83 ALBERS.crs

NAD 27.crs

Canada MTM.crs

Canada 3TM.crs

Minnesota (NAD83 MCCS).crs

New Zealand (NZTM2000).crs

Oregon (OCRS).crs

Wisconsin (WISCRS).crs


Related Topics

Coordinate Transform dialog
Coordinate Transformations
Coordinate Reference Systems
 

 

 

 

Copyright © 2026 Traverse PC, Inc.