TPC 2026
TPC 2026

 

 

Navigation: Drawings > Managing Drawings >

Temporary Drawing

 

 

 

 

When you open a traverse in its Traverse View, you can create a drawing that draws just that traverse only. TPC calls this a Temporary Drawing. In a temporary drawing, you can make whatever changes you need to the temporary drawing in order to analyze the traverse data, but when you close the Traverse View, the temporary drawing is destroyed.

Hints: Temporary drawings are created from the TRAVERSE.DRT drawing template. If you want to change how temporary drawings are displayed, replace the TRAVERSE.DRT file. More information is available in the Drawing Templates chapter of the Learning Guide.


Why have temporary drawings?

A temporary drawing lets you analyze the traverse data in the Drawing View without affecting the current drawing. In the temporary drawing, you might want to make the point labels larger so you can read them, or add elevations to the point label, or change the line type of the side shots. Changes like these can make it easier to see what the traverse is doing.


Creating a temporary drawing

•From any Traverse View, choose Tools | Draw This Traverse Only. TPC replaces the current drawing with a temporary drawing.

•To return to the current drawing, choose Tools | Draw This Traverse Only again.


Saving a temporary drawing

If you make changes to a temporary drawing, then close either the Traverse View or the Drawing View, TPC displays a message prompting you to save the temporary drawing as a permanent drawing (unless you have disabled this prompt). If you choose Yes, TPC will create a new permanent drawing that includes just the traverse displayed in the Traverse View and will copy the settings of the temporary drawing to it. Once that is done, TPC will destroy the temporary drawing.

Once you understand why TPC is asking you to save the drawing changes, you may want to choose Don't show this window again. TPC won't prompt you to save a temporary drawing with changes - it will just destroy it. To turn it back on, choose Tools | Program Settings, Drawing View from the desktop and turn on Show ‘Save Traverse Drawing’ Prompt.


Related Topics

Managing Drawings
Drawing Groups

 

 

 

 

Copyright © 2026 Traverse PC, Inc.