As you work on a survey, you want to see what you are doing. You want to see what the imported data or rotated traverses look like.
The Drawing View does this for you automatically. When you start TPC Desktop, it creates a drawing called Drawing 1. As you import data, add traverses, tag or un-tag traverses in the Traverses Manager, you are updating this drawing.
Think of this as your working drawing.
Working Drawing (1:02) - As you enter your survey data, TPC creates the working drawing for you.
Using a Working Drawing
Use it to evaluate the survey data, turn off side shots, zoom in to compare record data with ground data, etc. Then, when you are ready to start a map or plat, follow rule 1 above and create a new drawing. When you are finished with the drawing, follow rule 2 and re-open Drawing 1 (or Drawing View), your working drawing.
Rules for a Working Drawing
As you become familiar with TPC Desktop, it is important to remember that the current drawing will be affected by any traverses you tag or un-tag. A common pitfall for new users is to finish a drawing and then leave it open while they continue to do other work on the survey that isn't related to the finished drawing. This accidentally modifies the finished drawing.
Here are two rules to help you avoid this pitfall:
1.Before you start a new map, plat or exhibit, create a new drawing for it.
2.When you are finished with a drawing, close it before opening a different one.
Moving to a Final Drawing
You can move from the working drawing to a final drawing any time.