|
This is a good time to talk about geodetic computations. You can find this information in the Geodetic help topics inside the program.
CRS Transformations
TPC uses the survey’s CRS (Coordinate Reference System) to relate a geodetic position with a grid coordinate. Given a geodetic position, TPC can compute a grid coordinate and visa versa.
These CRS transformations also produce a convergence angle and grid factor for each point being converted, regardless of whether you start with a geodetic position or grid coordinate.
For those of you familiar with State Plane computations, TPC does not do State Plane Direct and Reverse computations carrying State Plane coordinates forward in the process. Instead, it does true geodetic (ellipsoid) computations, resulting in a new geodetic position from which a grid coordinate can be computed using the CRS.
See Transforming Coordinates.
Direct Geodetic Computations
When a new geodetic position is computed from an existing geodetic position, it’s called a Direct computation. TPC computes a geodesic (true geodetic line). See Latitudinal Arcs on next page.
The distance forward is the geodetic distance based on a great circle passing through the center of the ellipsoid and some height above or below the ellipsoid surface if desired. As a rule, it is slightly longer than a straight line between the equivalent grid points.
Inverse Geodetic Computations
When two geodetic positions are known, TPC Inverses the geodesic between them. The geodesic has a length, a mean bearing, and a unique bearing at each end. In the Traverse View and elsewhere, TPC displays the length and mean bearing.
Thaddeus Vincety’s 1975 Equations
When you select any of the geodetic distance options, TPC uses the equations from Thaddeus Vincenty in his 'Direct and Inverse Solutions of Geodesics on the Ellipsoid with application of nested equations'. Published in 1975, these are the classic, iterative solutions for computing a geodesic foresight (Direct) and inversing the geodesic distance and end point directions (Inverse) between two geodetic positions.
Geodetic Distances
Geodetic distances are derived from geodetic positions (latitude / longitude), as opposed to coordinate distances which are derived from grid (plane) coordinates (northings / eastings). Geodetic distances (geodesics) are always an arc distance at some height relative to the ellipsoid surface. As such, there are only three options for the elevation at which they are computed: 1) the mean course elevation 2) the project elevation or 3) on the ellipsoid surface itself.
Any geodetic point can be related back to Cartesian coordinates through the CRS.
See Geodetic Distance and Direction.
Geodetic Directions
All geodetic computations assume true bearings/azimuths. When you choose a geodetic distance option, TPC checks to make sure you have selected a corresponding geodetic direction.
See Geodetic Distance and Direction.
Geodetic Areas
TPC can also compute geodetic area instead of grid area. The difference between the two results from the grid factor, the elevation factor, and convergence of the lines.
Area types are tied to distance types. If you select a grid distance, you will also get a grid area. If you select a geodetic distance, you will get a geodetic area.
See Geodetic Closure and Area.
Latitudinal Arcs
TPC includes options to compute on latitudinal arcs per the Public Lands Survey System. These are Rhumb lines, not geodesics.
Some of you may be more comfortable with the terms great circle (passes through the center of the ellipsoid) and small circle (an arc of latitude with the equator being the only one that passes through the center of the ellipsoid).
TPC knows the difference between a geodesic (shortest distance between two geodetic positions) and an arc of latitude.
For PLSS computations involving latitudinal arcs, TPC includes a [x] Latitude Arc option. You will see this option in some of the COGO dialogs.
Related Topics
Geodetic Surveys Distance and Direction Types
Editions
Premium, Professional
|