|
Let’s take a look at a line of constant latitude.

•Open the sample file Learn Geodetics.trv. See Sample Surveys.
•From the Drawings Manager, choose Constant Latitude Line. You should see the following drawing.
This drawing shows the E-W Constant Latitude traverse, in which we entered the same Latitude for each point. This line of constant latitude is actually drawn as an arc with a very large radius. Because of our position on the State Plane grid, this line drifts south as we move west. The bearing labels reflect this drift.
Finally, look at the point table and notice that the LATITUDE and GRID FACTOR values remains constant while the others change as the line moves from east to west.
Entering Geodetic Distance and Direction
Let’s take a look now at a line generated from geodetic distance and direction.

•From the Drawings Manager, choose True E-W Line. You should see the following drawing:
Notice the information circled in the drawing above. The line is the same as the constant latitude line we looked at before, but the drawing settings have been changed to plot geodetic distance and direction as opposed to grid distance and direction.
In this example, we’ve selected the PLSS options (geodetic distance at the project elevation and true bearing based on mean course convergence).
•In the Traverses Manager, double click the E-W True Bearing traverse.

This traverse was generated by entering a due west geodetic bearing (True Bearing) and 80 chains geodetic distance (Geo Dist) for each point.
Note
Position the cursor over any bearing or distance and look at the status bar. In this example we’ve highlighted the bearing, and TPC displays Mean course convergence in the status bar, indicating the details of the bearing type.

•Choose View | Format View to display the Traverse View Format dialog. Then left-click the Advanced tab.
Notice that this traverse uses geodetic distance and bearings, forcing all computations to be on the ellipsoid.

The Units tells TPC we are entering chains even thought the survey is in feet.
Note
Here is a peek at the distance options. In addition to the grid option, there are four ground and three geodetic options.
Related Topics
Geodetic Surveys Distance and Direction Types
Editions
Premium, Professional
|