TPC 2026
TPC 2026

 

 

Navigation: COGO > Fitting Lines and Curves > Horizontal Line Fitting >

Fit Horizontal Line dialog

 

 

 

 

Enter the Horizontal Line Fit Dialog by highlighting the points in the Traverse View for which you want to compute a best fit line. If you select less than three points or select a traverse outside the Traverse View, TPC will assume you want to fit all the points in the traverse.

What

Pull down the list and select the points you want to include in the best fit computation.

First, Last

Identifies the first and last points in the range of points that will be used to compute the best fit line.

The end points of the best fit line TPC computes will be as close as possible to these points. So First and Last, in effect, help define where the end points of the computed line will be.

Options

Select the type of best fit computation you want to use.

Least Squares

Uses least squares to compute the best fit line.

Fixed Bearing

Compute the best fit line at this fixed bearing. Use an equation to recall the bearing between two existing points or pick a bearing from the current drawing.

Pass Through Point

Compute the best fit line that passes through the selected point. This is a good option for a line that passes through a known corner.

Recall an existing point by entering it's point label or pick it from the current drawing.

Compute

Select this button to do the selected best fit line computation.

Computed Points

Each time you choose Compute, TPC computes the best fit line and places the end points of that line into the computed points. You can create new points for the line endpoints by entering new point labels or you can update existing points by recalling their labels.

Once you have labeled the computed points, you can Edit, Save and Plot them.

Create unique point labels on Compute

If you turn this on, TPC will label the Computed Points 1 and 2 using the From and To points in the dialog. You can still change these automatic labels if you want.

If the From point is 200, TPC will create the label 200:1 for the Computed Point 1. If 200:1 is already used, it increment the created label to 200:2 and so on until it finds a label that has not yet been used.

Summary

Displays the most recent best fit line computation in the Report View.

TPC provides information about the points that were selected, the best fit line that was computed and the offsets of each of the selected points from the best fit line.


Related Topics

Horizontal Line Fitting
Horizontal Curve Fitting

 

 

 

Copyright © 2026 Traverse PC, Inc.