TPC 2026
TPC 2026

 

 

Navigation: COGO > Creating Multiple Points on a Line or Grade >

Multiple Points dialog

 

 

 

 

To create multiple points on a line, grade or curve, select a point in the Traverse View and choose COGO | Multiple Points. The points that are created become occupied points and are inserted above the selected point.

Note: If you insert multiple points where raw data exists and then recompute the traverse, the raw data will now assume that the last inserted point is the starting point. This may not be the result you want. You may want to create a copy of the original traverse (copies do not contain any raw data) and use the Multiple Points option on the copy.

You can create points by specifying the number of points, the horizontal spacing between points, or the vertical spacing.

From, To

Define the end points of the original line. You can't edit these. They are determined by the position of the cursor in the Traverse View when this option was selected.

If these are not the points you want, choose Cancel to return to the Traverse View, select the line you want and return to this dialog.

Enter the Desired Spacing and/or Number of Points

Enter the data that determines how the points will be computed.

Horizontal Spacing

Enter the Horizontal Spacing between each point. If you have already entered the Number of Points, you will be prompted to recompute the Number of Points based on the distance you just entered. If you do not recompute Number of Points, only that number of points will be created.

Vertical Spacing

Enter the vertical increment to use in creating Multiple Points. If you enter 1, a point will be computed for every unit (Foot, Chain or Meter as selected in the Program Settings) change in elevation.

Example 1: If the elevation of the From point is 2314.3, the To point is higher than the From point, and you enter 1 for the vertical spacing, the following elevations will be computed

2315, 2316, 2317, ...

Example 2: If the elevation of the From point is 2314.3, the To point is higher than the From point and you enter 5 for the vertical spacing, the following elevations will be computed

2315, 2320, 2325, ...

First Distance

Enter the horizontal distance that you want the first created point on line to be from the From point.

Number of Points

Inserts the specified number of points in the line and computes the horizontal and vertical spacing.

Computed Points

First Label

Enter the starting point label for the computed points. See Labeling COGO Points.

Next Label

Look for the next available survey point based on the current Starting Label. If the Starting Label is already unique, it is not modified.

Description

Enter a description to add to each created point.

Interpolate Elevations

Turn this option on if you entered Horizontal Spacing and you want to compute elevations for the points on line. If you turn this option off and enter Horizontal Spacing, each point on line will get the elevation of the From point.

Undo

Remove any computed points from the survey.

Compute

Select OK to create the points.

Summary

Add a section to the current report, listing all the inputs and computed points.

Close

Close the dialog.


Related Topics

Creating Multiple Points on a Line or Grade
Entering Equations
Setting the Default Direction
 

 

 

 

Copyright © 2026 Traverse PC, Inc.