|
Compute offsets from each traverse point, within the range you select, to a straight line. Offsets can be added to the current traverse as side shots or placed in a separate traverse.
Offsets are not computed for side shots, benchmarks, etc. If you want offsets from these points, first change them to control points.

Grid vs PLSS vs Geodetic
To compute offsets to a grid line, specify the grid direction type and leave the [ ] Latitude Arc toggle turned Off.
To compute an offset to an East-West PLSS line, specify a geodetic direction type and turn on the [x] Latitude Arc option. TPC uses the mean latitude of the line to estimate the radius of the geodetic line to offset to.
The [ ] Latitude Arc option is not used with North-South lines. TPC checks the status of the toggle when you choose Compute. If it is turned on for a North-South line, TPC will tun it off and display a message stating that this option is being disabled.
TPC does not currently compute a purely geodetic offset. Instead, if you choose a geodetic direction type, TPC turns on the [x] Latitude Arc option.
Specifying a Line to Offset To
Specify two points that define the bearing/azimuth of the line or specify one point and type in a line bearing/azimuth. The points used to define the line do not have to be part of the traverse, only part of the survey. Refer to entering equations for more information.
Specifying a Range
You must specify the range of points within the traverse by selecting those points in the Traverse View.
Line Starting Point, Bearing
These define the line to offset to. Use the [>] pick button to select the point and bearing from the current drawing. There a separate [>] pick button that lets you select the line from the current drawing. The end of the line you click nearest to will be the Start point and the bearing will be computed to the other end of the line.
Computed Points on Line
This group of options allows you to specify labels and descriptions for the computed points.
Starting Label
Specify a starting label or label mask. See Labeling COGO Points
Next Label
Increments the current starting label to the next available survey point label.
Description
Enter a description to copy to each created point.
Copy Offset Label to Description
Copy the description of the offset point to the point created from it.
Offset What
You can create offsets for the entire traverse or for just the currently selected points. You must select the points to offset before accessing the Right-of-Way Offset dialog.
Type (Offset Option)
Choose an offset direction. Perpendicular is the default. North/South and East/West are the other options.
Latitude Arc
If you are computing North-South or Perpendicular offsets to an East-West geodetic line or a line in the Public Lands Survey System (PLSS), turn on the [x] Latitude Arc option. See Geodesic vs Rhumb lines. For PLSS offsets, you will also want to select the appropriate Distance and Direction types.
The [x] Latitude Arc option may be turned On or Off automatically depending on whether you have specified a geodetic distance and have specified end point of the line to offset to. For North-South lines, it is always turned off.
Special case for East/West offsets
East /West offsets create a special case. These are generally offsets to a North/South line that is not on a latitude arc. In this case, TPC does a bearing_bearing intersect, accounting for convergence at the beginning of the North/South line and the offset point. This is a good approximation for short lines and short offsets.
The summary for this computation includes a statement to this effect.
Save as Offsets
Compute the offsets and insert them as side shots in the current traverse. Offsets have the same point label as the point they were computed from but with the extension "-OFS".
As an example, the offset of point 101 would be 101-OFS.
Save as Traverse
Compute the offsets and save them to a separate traverse. The name of the new traverse will be the same as the current traverse but with the prefix "OFS-" added to the traverse name. The new traverse is inserted into the Traverses Manager immediately after the current traverse. The offset points themselves are labeled just like points inserted as side shots.
Summary
View the offsets report on the screen, which shows the posting intervals, average offset and average interval. Summary does not create any points, it just displays a copy of the report that can be sent to your printer.
To adjust the column widths of this report, choose Tools, Program Settings, Widths from the TPC Desktop. Enter the Label, Angle, Distance and Description widths you want. TPC uses these widths in a number of reports.
Close
Closes the Offset Interval dialog and returns you to the Traverse View.
Related Topics
Computing Offset Intervals for Posting Line Creating Offsets to a Straight Line Entering Equations Setting the Default Direction
|