|
Compute the Station/Offset of points in this traverse to an alignment defined by any other traverse in the survey. A new traverse will be created to hold the resulting station/offset points which will be inserted into the survey immediately following the selected alignment traverse.

Select the Alignment Traverse to Offset To
Click the down arrow and use the cursor keys or mouse to highlight the traverse that defines the alignment you want to offset to.
Traverse Groups
If you have groups turned on in the Traverses Manager, TPC displays Group:name for each traverse group in this pulldown list of traverses.
•To display just the traverses in a group, left click the group you want to expand. TPC updates the list to show just the traverse groups and expands the group you clicked.
•To display the traverses in a different group, left that group name.
•To display all the traverses in the survey, click All Traverses...
If you have lots of traverses in a survey, grouping the traverses is a great tool to help you manage them. Displaying groups in this pull down list of traverses allows you to focus in on the traverse group you want.
Tolerance
Alignments can have adjacent segments that are not exactly tangent to each other. These occur when two tangents meet at an angle point or when the segment adjacent to either end of a spiral or curve does is not exactly tangent to the spiral or curve. These cases of non-tangency create areas in which an offset point is not perpendicular to the alignment – kind of ‘gray zones’.
The tolerance value you specify here allows TPC to account for these cases of non-tangency by looking for offsets that are nearly perpendicular but not quite. A tolerance of 1 unit would probably catch all of these non-tangency cases while a tolerance of 0.1 unit would catch many but not all.
Option 1: Multiple Offsets
You can generate offsets for each point in a traverse, selected points in a traverse and for all the points in selected traverses. Each of these options generates a new traverse for each source traverse from which the offsets points originated. You select the traverses and points via the What list, then use the Compute button to compute the offsets and create the new traverses.
Offset What
You can create offsets for the entire traverse or for just the currently selected points. You must select the points to offset before accessing the Right-of-Way Offset dialog.
Compute
Computes the offsets and creates the new traverse. TPC displays a message box, listing any traverses it created. TPC will also update the Traverses Manager to include the newly added traverses.
Option 2: Single Point Offset
Use this group of fields to compute the offset of a single point to the selected alignment. You can enter as many single points as you want, printing a summary of each to the Report View. Use the [>] pick button to select the point from the current drawing.
Point
Enter the point for which you wish to compute the offset. By default, the point that was selected in the Traverse View is displayed as the first offset point.
Each time you enter a point, TPC recomputes the Offset and Station displayed.
Offset
The computed offset distance to the alignment.
Station
The computed station on the alignment at which the single offset point is perpendicular.
Summary
Add the single point offset information to the Report View.
Recompute
Use this button to repeat the last automatic computation (when you entered a point or selected an alignment). You don't have to use this button at all. It's just a way to make sure you computed what you want.
Close
Closes the Offset to Alignment dialog.
Show Single Point
Choose this button to expand the dialog, allowing you to compute the offset of a single point.
Geodetic vs Non-Geodetic
When you open this dialog from a traverse (traverse view or Traverses Manager), TPC pre-sets the dialog's distance and direction types to match the traverses. This only affects the Offset computed in the Single Point section of the dialog, which is displayed in the same distance type and units as the traverse.
Related Topics
Creating Offsets to an Alignment Entering Equations Setting the Default Direction
|