TPC 2026
TPC 2026

 

 

Navigation: COGO > Creating Offsets to Lines, Curves and Spirals >

Offset to Line dialog

 

 

 

 

Line to Compute Offsets To

You have to option to offset to an existing line, which can be a tangent, curve or spiral. You also have the option to offset to a straight line, run through some point at some bearing/azimuth. You determine which by how you specify the line to offset to.

Offsetting to an Existing Line

Enter the point labels that define the line you will be offsetting to or use the Line [>>] pick buttons to select a line from the current drawing. TPC displays abbreviated information about the line you have selected to the right of the Bearing field. You will at least know the radius and length if it is a curved line or spiral. TPC displays the inversed bearing of the existing line in the Bearing/Azimuth field. This can be a Grid bearing or True bearing depending on the Direction type you have selected for this dialog.

When you select an existing line, TPC computes the offset to the line regardless of whether it is a tangent, curve or spiral.

For tangent and curve lines, TPC will compute the offsets beyond the end points of the line. For spiral lines, TPC does not compute the offset beyond the end of the spiral.

If you are using geodetic distance and direction types, TPC turns on the [x] Latitude Arc option and computes the offset to the mean azimuth of the line. This is not the same position as an intersection to the line (tangent, spiral or curve) which is computed only for non-geodetic distance and direction types.

Offsetting to a Bearing/Azimuth Through a Point

As opposed to offsetting to an existing line, you can also offset to a bearing/azimuth passing through any point Think of this alternative as a offset to a straight line at any bearing/azimuth.

Enter the starting point of the bearing line in the From field and a Bearing/Azimuth. You can use an equation to enter the Bearing/Azimuth (i.e. 1..2 recalls the Bearing/Azimuth from pt 1 to pt 2).

Offsetting to True Lines PLSS

To compute the offset to a line of true bearing/azimuth, first open the dialog from a traverse with a geodetic distance type or select one of the geodetic distances from the Distance pulldown list. You may need to select Show Options to display the Direction list. You will also need to specify both ends of the line you wish to offset to.

Type (Offset Option)

Choose an offset direction. The default direction is perpendicular. You can also choose North/South or East/West.

Latitude Arc

If you are computing North-South or Perpendicular offsets to an East-West geodetic line or a line in the Public Lands Survey System (PLSS), turn on the [x] Latitude Arc option. See Geodesic vs Rhumb lines. For PLSS offsets, you will also want to select the appropriate Distance and Direction types.

The [x] Latitude Arc option may be turned On or Off automatically depending on whether you have specified a geodetic distance and have specified end point of the line to offset to.

Special case for East/West offsets

East /West offsets create a special case. These are generally offsets to a North/South line that is not on a latitude arc. In this case, TPC does a bearing_bearing intersect, accounting for convergence at the beginning of the North/South line and the offset point. This is a good approximation for short lines and short offsets.

The summary for this computation includes a statement to this effect.

Note: Prior to 5-6-2024, if [ ] Latitiude Arc was turned off, TPC always displayed the Dist from Start of Line as a grid distance. For nonGeodetic distance types, Dist from Start of Line is now always in the distance type selected in the dialog.

Compute Single Offset

Use these options to create a single offset point.

From

This is the single point for which you are computing the offset. Use the [>] pick button to select the point from the current drawing.

POL

This is the point on the line where the offset intersects the line. You can save this point by labeling it and choosing Save.span lang="en-us"> Use the [>] pick button to select the point from the current drawing.

Bearing, Offset

These are the computed values that tell how far and in what direction to go from the offset point to the point on line. They match the distance type and units of the dialog.

The dialog also indicates whether the offset point is Left or Right of the line.

Dist from Start of line

Distance from the start of the line to the POL. If the offset point is behind the starting point of the line, the dialog displays “Behind Start” next to this value.

This distance also matches the distance type and units of the dialog.

•The exception to this is the [ ] Latitude arc option for geodetic distances.  When turned off, this distance is grid distance.

Edit

Choose Edit to enter a description and point symbol for the computed point.

Save

You must select Save in order to save the computed point.

Plot

Adds the computed point to the ‘Point Plot’ traverse and the current drawing.

Summary

Choose Summary to add information about this offset to the current Report View. If you turned on the [x] Latitude Arc option, TPC includes the mean latitude of the line you are offsetting to in the report.

Recompute

As you enter data into the dialog, TPC computes the position of the Computed Point on Line, even though you still have to Save it. Pressing this button just repeats that last automatic computation. It's a way to make sure TPC has tracked with all your changes.

View

View the offset graphically.

Compute Multiple Offsets

This allows you to specify multiple points to offset from, using the What list. 

What

Use the What list to tell TPC which points (multiple points) you want to offset from.

Save Traverse

Create a traverse with these offsets as sideshots from the computed POLs (Points on Line).  This is the same traverse you see with the View button.

View

View the offsets graphically.

Summary

Choose Summary to add information about each offset to the current Report View. If you turned on the [x] Latitude Arc option, TPC includes the mean latitude of the line you are offsetting to in the report.

Close

Closes the Offset to Line dialog and returns you to the previous view.

Show Options

Select Show Options to display the Distance and Direction pull downs. These let you determine what type of distance and direction to use for the offset.

For example, if you choose a True direction and Geodetic distance, TPC will compute a North-South offset (explained below) along the True North-South meridian and display the geodetic offset distance to the line.

Geodetic vs Grid

To compute offsets to a geodetic line, you must 1) specify both ends of the line and 2) use a geodetic distance type.  If you meet both of these conditions, TPC will turn on the [x] Latitude Arc option and use the mean latitude of the two end points to estimate the radius of the geodetic line to offset to. If you do not meet these conditions, TPC will compute the offset to a straight line (line of sight) between the two end points or at the specified bearing from the given starting point.

The distance and direction types must match. If they don't TPC will warn you that they don't when you Save the computed point or add a summary to the current report.


Related Topics

Creating Offsets to a Straight Line
Computing Offset Intervals for Posting Line
Entering Equations
Setting the Default Direction

 

 

 

Copyright © 2026 Traverse PC, Inc.