|
To create a right-of-way, choose COGO | Right of Way Offsets from the Traverse View. If the traverse were the centerline of a road, this would create the R-O-W margins for the roadway. You might also use this option to compute an easement around a lot, etc.

R-O-W points are not computed for side shots, benchmarks etc. If you want R-O-W offsets from these points, you must first change them to occupied points.
An R-O-W offset traverse can be created at a specified offset distance both to the right and/or left of the current traverse.
Offset What
You can create offsets for the entire traverse or for just the currently selected points. You must select the points to offset before accessing the Right-of-Way Offset dialog.
Left / Inside, Right / Outside
Select the option and enter an offset distance
The Left and Right options are based on the sequence of the traverse. Think of it as starting at the beginning of the traverse and going to the next point as you think left and right.
The Inside and Outside options are based on the clock-wise or counter-clock-wise direction of the traverse if it were forced to close back on itself.
Multiple
You can create any number of offsets from each original point. Additional offsets are multiples of the offset distance. A 20’ offset for instance, would have multiples of 20’, 40’, 60’, 80’, etc.
Label
Select how you want the offset points to be labeled. Traverse PC's default settings of add "R" to right offsets and "L" to left offsets (1R and 1L for example). You can change this to whatever you choose. If you change the Left Label field to "L*" you will end up with point labels L1, L2, etc. Default = *L for left and *R for right.
Next
TPC evaluates the current label, selecting the next available point label if the current label is not unique.
Description
Enter a description to be used for each offset point.
Copy Center Line Description
Copy the description of the original point to each offset point.
Compute Options
Save as Offsets
Creates the R-O-W points and inserts them as offset point types (like side shots) from the current traverse points.
Offset points retain their relationship to the original alignment and so are automatically recomputed if the alignment changes. If you think you might be modifying the original alignment after the offsets are computed, you should choose this option.
Save as Traverse
Creates the R-O-W points and puts them in their own traverse (one traverse for points to the right and another traverse for points to the left). The new traverses have the same name as the current traverse but with the prefix "R/W-RIGHT-" and "R/W-LEFT-" and are inserted into the Traverses Manager immediately following the current traverse. The R-O-W points themselves are labeled just like points created with the Save as Offsets option.
TPC computes the offsets and adds them to the new traverse, but the offset points do not retain their relationship to the original alignment. Because of this, R-O-W traverses are not automatically updated should you go back and modify the original alignment.
Force Traverse Closure
Forces the traverse to start and end on the same point for the sake of computing the offset at the initial point. In order to compute a closure error for a traverse, it must start and end on two different points, even though they may be the same physical point on the ground. When you force the closure, TPC ignores any closing error and computes the initial offset as if the initial point and closing point were the same point.
Tolerance
The offset tolerance determines how close any two points being offset need to be in order to be treated as one point. If they do not reference the same survey point but are within the specified tolerance of each other, they will be considered the same point and you will get a single offset instead of two. This is particularly important for the initial point and closing point of the traverse if you save the offset as a traverse. If both points are within Tolerance of each other, TPC treats them as if they were the same point and closes the offset traverse so that it starts and ends with the same offset point. If the initial and closing points are not close to each other, you can still force closure of the offset traverse by turning on the Force Closure option.
Spiral Offset Method
Choose from Spiral Angle or Chord Ratio. See Spiral Definitions.
Combining Options
In the Save as Offsets and Save as Traverse notes above, notice that Save as Offsets retains the relationship of the offset point to the original alignment. So, if you think you might need to modify the original alignment in the future and want the offset points to update automatically, you should choose both options Save as Offsets and Save as Traverse.
Combining these options creates offset points that are shared by the original alignment traverse and the new R-O-W offset traverse.
Compute
Computes the offsets.
Summary
After you have computed the offsets, the Summary will add the computed offsets to the current report.
Close
Return to the Traverse View. Points created with the Save as Offsets or Save as Traverse options are now a part of the survey and are not deleted.
Show Options
You can change the distance and direction types used to compute offsets. The actual offset computations are always done in grid. So TPC converts the offset distance you enter based on the distance type selected here.
As a rule, offsets are computed based on the grid. However, if you are working with ground distances at some project elevation, you can easily change to the corresponding distance type. The offset distance you specify in the dialog, will then be a ground distance.
Related Topics
Creating Offsets or R-O-W Offsets Entering Equations Setting the Default Direction
|