TPC 2026
TPC 2026

 

 

Navigation: Coordinate Reference Systems > Converting Coordinates >

Coordinate Conversion Dialog

 

 

 

 

This option is available to let you convert a survey between coordinate systems.

To change the coordinate units of the current survey, choose Tools | Coordinate Conversion.

Note: If you choose feet or chains, the program will display all of its data in feet and inches. If you choose meters, the program will display all its data in mm and cm.

Note: ** The units of the survey only change when the entire survey is converted. If you convert parts of the survey (a single traverse or point) you must remember the units they were converted to in order to convert them back if you need to.

What List

Choose what in the survey you want to convert. You have the choice between converting the entire survey (Default), selected items in the Points Manager, Traverses Manager or Drawing Manager or tagged items in the Points Manager, Traverses Manager or Drawing Manager. We now have the ability to convert coordinates from objects selected in the Drawing View. Simply Use the Select Objects command and choose what objects you want to have converted from the Drawing View and the whatlist will take care of the rest!

*You will notice when you're doing an import or export the coordinate conversion dialog doesn't have its whatlist. The whatlist on the coordinate conversion dialog isn't needed when doing imports or exports.

Starting in TPC Desktop 2011, if you are not transforming the entire survey, TPC warns you if it encounters any fixed geodetic positions. The warnings appear in the Message View and list the survey points that are affected. If you transform the entire survey, you will not receive this warning.

The reason for this is that if you establish the position of a survey point geodetically, that geodetic position is fixed. This is not the same as the point being protected, it just means that the coordinates of that point are dependent on the geodetic position of that point and the CRS used to related coordinates with geodetic positions. The coordinates of such fixed geodetic points can not be transformed because they will just be 'recomputed' from the fixed geodetic positions.

From

Greyed out and set to current survey units when the what list is selected to convert the entire survey. If anything else is selected from the what list then there is a choice between Feet, Chains or Meters.

To

Choose Feet, Chains or Meters. To change units, choose one of the other units. Changing units only changes the coordinate values. It does not change the position of the survey points, nor does it change any of the raw data you may have entered in traverses.

Grid <=> Ground

The From and To pull downs in the Coordinate Conversion dialog include Ground and Grid selections. TPC treats these in a unique way as follows.

If you select Grid for either From or To, TPC will specify Ground for the other. If you select Ground, TPC will specify Grid for the other.

Grid <=> Ground conversions do not modify elevations. They are strictly X & Y conversions.

Grid <=> Ground conversions do not not change coordinate units. If the survey units are meters before the conversion, they are meters after the conversion.

Factor

This is the computed factor that will be used to change the survey data. You can use it or enter your own factor.

If you convert between grid and ground (selected from the pulldown list), TPC automatically inserts the survey's Combined Factor or it's inverse into the Factor field for you. You can overwrite this if desired, or reselect grid or ground to put it back in.

Note: To convert survey units without changing the coordinate or distance values, enter a factor 1.0.

You can also compute a scale factor from most of the available calibrations and use that scale here in the Factor field.

International Foot, U.S. Survey Foot

You can specify which factor to use when converting between meters and feet.

International Foot:1 ft = 304.80 mm

U.S. Survey Foot:1 ft = 304.800609 mm (from 1 m = 39.37 Moffit/Bouchard 6th edition 1975)

Base Point, X, Y, Z

If you want to shrink or expand the survey coordinates about a certain point, enter the coordinate value of that point. If the point is already defined by an existing survey point, just recall that point.

Use Project Location

Use the location you have specified in the Project Factors dialog.

This allows you to use one project point for scaling grid <=> ground coordinates.

Protected Points

Convert protected points.

Raw Data

Convert raw data like slope distance, radius, etc.

Your decision to convert raw data depends on whether the raw data units match the coordinate units. Some times, particularly when importing raw data from a data collector, your raw data may be in feet when the survey units are meters.

Show conversion details

Turn this option On to report details details like what points and lines were converted and not converted in the message view after the conversion is completed.

OK

Applies the Coordinate Conversion you have specified and returns you to the previous view.

Cancel

Returns you to the previous view without making any changes.


Related Topics

Changing Units
Using Coordinate Conversion
Grid vs Ground
Coordinate Conversion Command
Traverses Manager
Whatlist

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.