TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing Objects > Lines >

Line/Arc/Rectangle Properties Dialog

 

 

 

 

These settings apply to an individual line, arc or rectangle in a drawing.

 

Colors

Select the color you want TPC to use for the line.

Fill

Choose a fill type for the traverse. Solid and Pattern fills like Diagonal assume the color of the traverse. Bitmap fills retain their own colors. You can not fill lines and arcs.

Paper Space

Check this option if you want the X and Y to display the paper coordinates (inches). Uncheck this option if you want the X and Y to display survey coordinates.

Line

Select the line type (solid, dashed, etc.) and size you want the line drawn with.

Arrow

Select an arrow type and size.

Arrow point angle

This option changes the angle of the arrow from each side of the line the arrow is attached to. 10 degrees would make a skinny arrow, and anything greater would make a thicker arrow.

X, Y, Z

These are the coordinates of the line. They appear in relation to the paper if Paper Space is checked, or in survey coordinates if Paper Space is unchecked. You can edit these coordinates for a line you have drawn in TPC CAD. You cannot change these coordinates if the line was drawn by survey data.

Radius

The radius of the arc. In TPC, arcs are always drawn clockwise from the start point to the end point. A negative radius indicates a delta > 180 and draws a cul-de-sac.

For a rectangle, TPC uses the radius to round the corners.

Chord

If you are working with an arc, this field differentiates between the chord length and the arc length (in the H Dist field).

Entering a Chord value extends the end points of the arc. Entering a radius or H Distance just changes the shape of the arc but doesn't reposition the end points.

HDist

Horizontal Distance of the line. When entering a line, you can enter the length at which to draw the line.

VDist

Vertical Distance of the line.

SDist

Slope Distance of the line.

Bearing/Azimuth

The direction of the line. If you are entering a line, the direction you enter here determines the endpoint of the line.

VAngle

Vertical angle of the line with horizontal being zero and vertical being 90 degrees.

Percent

The slope of the line expressed as a percent (10 percent = 10%).

Area (Rectangle Only)

TPC can compute the area of any rectangle from this dialog. Just click the refresh button and TPC will compute area in square units (i.e. sq ft, sq meters) and area units (i.e. Acres, Hectares).

TPC stores the computed area with the rectangle in the TRV file, plus displays the area in the tooltips and Drawing Data Manager.

TPC accounts for the curve segments created at the rectangle corners.

OK

You will return to the Drawing View and your new settings will be in use when you click OK.

Cancel

Returns you to the Drawing View without applying any changes.

 

 

 

Copyright © 2026 Traverse PC, Inc.