|
Accessed by choosing the Tools | Program Settings, Miscellaneous tab.
This option allows you to make various settings affecting the program operation.

Word Processor
Allows you to set the default word processor or use the Browse button to locate it.
Picture Editor
Enter the name of your default picture editor or use the Browse button to locate it.
Synchronize Views
You can select from these options:
Automatic (default) - Updates all visible views as data is edited. If an affected view was autohidden or not open, it is refreshed the next time it becomes visible.
When view is activated - Updates each view when it is activated (becomes the active view).
Off (manual) - Views are only updated when you tell the program to refresh them or when they are opened for the first time.
The synchronization options have a greater affect on the speed of the TPC Desktop as the file size increases. As you can imagine, it doesn't take much time to update the Points Manager if you just have a few hundred points in your survey. But what if you have 5,000 points? Your computer may require an extra second or two to update the Points Manager alone. That's when you will start to notice the speed change and will want to consider switching from the Automatic settings to one of the others.
Warn me if I try to edit protected coordinates
Turn this option On to display a warning if you try to edit the coordinates (X, Y Z) of a protected point. You must choose Yes to update the coordinate, preventing you from inadvertently changing a protected coordinate.
Some users want the ability to manually update the coordinates of a protected point while others don't want to accidentally change a protected coordinate value. This option lets you determine whether or not you are warned.
The coordinates of protected points are never modified by the program itself. This option merely determines whether or not TPC will warn you if you try to manually override protected coordinates.
Show Current Drawing When Opening a Survey
Turn this option On (default) to open the current drawing after opening a survey. As a rule, you want to see where you left off, and opening the last draiwng helps you do this.
You might want to turn this option Off if you are working with large surveys that take awhile to draw. To can still see the current drawing when you open the Drawing View.
Show Point Label Dropdown After _ Characters
Turn this option On (default) to show a drop down list of matching point labels most places you enter a point label. If turned On, TPC starts displaying matching point labels once you have entered a certain number of characters (default = 2). You can delay the pulldown list and make it more limiting by increasing the number of characters.
Min=1, Max=10
Windows Printer Options
Use Windows Default Printer
The program tries to store the printer you have selected for printing the views and reports. It also tries to store the printer used for each drawing. If you get an Invalid Page Fault when trying to print the Message View or Drawing View, your computer may not be capable of using stored printers. In that case, turn on this option. If you have printed or plotted to a device other than the default Windows printer, you will need to select the alternate device each time you run the program. Default-=Off.
Validate Stored Printer
When the above option (Use Windows Default Printer) is turned off, the program tries to reconcile the stored printer with the installed printer on your computer. If the stored printer is installed on your computer, the stored printer information is updated to the driver on your computer.
Discovering Printers
When a survey is loaded TPC searches for installed printers for each drawing. Sometimes those printers may not be available, this can make the search for the printer slow, especially if you have many drawings that reference the non-existent printer. TPC keeps track of printers that it couldn't find when the survey was loaded so opening new drawings, etc is faster. If you are able to add the printer that TPC could initially find then all you have to do is close and re-open the survey and TPC will go out and search for those printers.
System Beeps
TPC uses Windows sounds (beeps) to notify you of certain events in the program. You can turn these off if you want. See Beeps (program sounds).
Information
TPC uses the Windows Asterisk sound to notify you that it completed something you asked it to do or to prompt you for more information.
Warnings
TP uses the Windows Exclamation sound to notify you when it wasn't able to complete a task they way it should have. This sound often accompanies a prompt, asking if you want to accept the outcome or change it.
Errors
TPC use the Windows Program Error sound when an error occurs. This sound often accompanies a prompt, asking if you want to accept the outcome or change it.
OK
Applies the Program Settings you have selected.
Cancel
Discards any changes made in the Program Settings and returns you to the previous view.
Related Topics
Program Settings Beeps (program sounds)
|