TPC 2026
TPC 2026

 

 

Navigation: COGO > Warnings and Errors >

Offset is not perpendicular

 

 

 

 

TPC determined that this point is not perpendicular to the alignment.

This can sometimes happen when a point is offset from an angle point in the alignment. For example, an offset from a tangent to spiral point on the alignment may not compute as perpendicular due to the spiral alignment.

TPC considers reasonable tolerances when determining if a point is perpendicular. These tolerances will catch most rounding errors sometimes found in alignments.

Correction

Check the alignment and the point and try again.


Related Topics

Station Offset Report

 

 

 

Copyright © 2026 Traverse PC, Inc.