No qualified objects were selected for this operation
Even though you may have selected some objects, TPC did not find any objects to perform this operation on.
You will receive this warning if you try to move or rotated point symbols, point labels, or other traverse objects if the survey points they reference are protected. In fact, if even just one of the reference survey points is protected, TPC will display the warning and cancel the operation.
Correction
Try the command again. Be sure to select just the objects you want.
Check for protected points related to your selected objects. You may need to manually unprotect them.
Modifying Traverses in Drawing View
You will also get this warning if you try to move or rotate point symbols or point labels with the Move or Rotate commands. TPC can move and rotate the entire traverse associated with those symbols or labels, but not the individual labels themselves. They can be rotated via their Properties or in the case of the symbol, can also be rotated vie the Survey Point Properties. See Modifying Traverses in Drawing View.