TPC 2026
TPC 2026

 

 

Navigation: Point Codes >

What Are Point Codes

 

 

 

 

Point codes are number codes or abbreviations used to identify points in the survey. They are typically short to facilitate coding in the field and may or may not be descriptive of the points (i.e. 121=Oak Tree, 245=3 port fire hydrant, TOE=toe of slope, CLF=Chain Link Fence, etc.).

TPC assumes the point codes you use are stored in the point description. This means TPC can generate point codes from any data collector or total station that uses point descriptions. You can also include additional information about a point in its description because TPC is flexible in its determination of which part of the description the point code is. As an example, TPC knows that both point descriptions "PP" and "PP #1456" contain the code "PP", while the second includes additional information: the pole number #1456.


Point Codes help turn your data into drawings

TPC uses the codes to sort points into traverses. All the points with the CLF code end up in the Chain Link Fence traverse, all the Oak Trees are in their own traverse, etc. The individual traverses convert the field data into a site map.

Unsorted

Sorted


Example Point Codes

The following are example point codes. TPC assumes the first word in the description is the code, additional description text is separated from the point code by a space and that if additional codes are included, they start with the -- delimiter.

Point          Description

108          TFC2          - the first word is a code (TFC2)

109          CB --TFC2          - additional codes start with the code delimiter (--)          

110          SW1          - SW1 is the first Side Walk

111          SW3          - SW3 is another Side Walk

112          DTT GRAVEL BOTTOM          - include a space and any additional text

113          DTT GRAVEL BOTTOM          

CS1          FND WOBBE 5/8 @ NE 7          

Note

Include any descriptive information after the code, such as OAK 20” rather than 20” OAK.  In the case of 20” OAK, TPC would read 20” as the code rather than OAK.

On some data collectors, these same codes might all start with the code delimiter as follows. Either way, TPC will read the codes just fine.

108          --TFC2

109          --CB --TFC2

110          --SW1          

111          --SW1          

112          --SW1


Related Topics

Point Codes

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.