TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD > Formatting Labels >

Stacked Label Orientation

 

 

 

 

Stacked labels can be oriented Parallel or Perpendicular to their lines or Horizontal or Vertical relative to the page.

All stacked labels are created  using the stacked label format and positioned above, below, inside or outside based on the label format.

 

Stacked Label Orientation (6:20) - See how to orient stacked labels Parallel, Perpendicular, Horizontal or Vertical.


Parallel

The label is oriented parallel to and center justified horizontally about the mid-point of the line segment.


Perpendicular

The label is oriented perpendicular to the direction of the line at it's mid-point.

Currently, TPC places either the top or the bottom of the stacked text at this mid point. It can't currently place the vertical center of the stacked text at this point.

The label will be justified Left or Right, depending on which side of the line it is on so that all the items in the label are as near as possible to the line.


Horizontal

The label is oriented horizontally to the page, regardless of drawing rotation.


Vertical

The label is oriented vertically to the page, regardless of drawing rotation.


Stacked Parallel vs Aligned

You can format labels so that a stacked label oriented parallel to a line looks identical to an aligned label with line breaks. For example, the stacked label H\B oriented parallel to a line would create the same label that the aligned label H\B would create. This is just a small area of overlap between stacked vs aligned. We mention here just so that you are aware of it.

TPC does not currently support line breaks (\) in aligned curve or spiral labels.


Alignment

You can also specify the alignment to use for stacked labels, choosing from Left, Center, Right or Auto Left/Right.

TPC tries to apply this alignment within the existing label without moving its position. In some cases, you may need to reposition the text to get it exactly where you want it.

Auto Left/Right is a special alignment option available only to stacked labels. When selected, the label's alignment switches automatically to Left or Right, depending on which side of the object the label is on.  If you have leaders turned on, you will notice the point where the leaders attaches to the label also changes from Left to Right.


Related Topics

Label Command
Labeling Traverse Lines
Labeling Drawing Objects
Formatting Labels

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.