|
Any line label in a drawing can be placed in a Line Table where each row represents a labeled line in the drawing.
Each drawing can contain only one line table. For other drawing tables see Drawing Tables.
|
Line
|
Distance
|
Bearing
|
Record Data Per CSF14356
|
<- column headings
|
|
L1
|
14.56
|
N45°30'15"E
|
[14.00/ N45°00'00"E]
|
<- table item
|
In this line table, L1 is the reference for the line listed in this row of the table. The actual line in the drawing is labled with the 'L1' reference instead of the distance and bearing. Line tables use the prefix 'L' to reference table items. you move the cursor over a table item the status bar will display Table Item followed by the reference label to indicate which table item the cursor is over.
Table Styles
Table styles determine how items are added to a table. The style can be All, Auto or Manual. You can start with one style, like Auto and have TPC add the appropriate table items, then switch the table to Manual and fine tune the selection of items.
All Style
Use this style to include all the line labels in the Line table. This option would be appropriate for small surveys with a limited number of labeled lines.
Auto Style
The Auto style automatically places a line label in the line table if it doesn't fit on its line. As you re-scale the drawing, TPC re-checks the line labels and rebuilds the line table to include those labels that don't fit on their line. If the new scale allows a line label to fit on its line, TPC removes it from the table and places it back on the line.
The table is rebuilt each time the drawing is regenerated. As a result, you will see the reference labels (L1, L2, etc) change to reflect the status of the table.
Manual Style
For more control over the line table items, choose the Manual Style. When a table style is set to Manual, you can append individual line labels to the line table in the order you want them. Unlike the Auto Style available for line tables, the Manual style does not select which line labels go in the table each time the drawing is regenerated.
•To add a line to its table, right click the label and choose Append to Table. TPC will compute the next table reference, replace the line label with the computed reference and append a new table item to the appropriate table. If you choose to append a label and the line table doesn't exist, TPC will prompt you to create it and set its style to Manual.

Label Orientation
For manual line tables, TPC can orient the labels L1, L2, etc. the same as the original label's orientation. So if the original label was stacked perpendicular to the line, the resulting table label will also be oriented perpendicular to the line. If the original label was aligned (parallel to the line), the resulting line label will also be parallel to the line.
This option for manual line tables can be turned on or off in the Table dialog using the [x] Retain original label orientation. This option is only available for Manual line tables.
Adding Record Data to a Line Table
TPC lets you add your own information to a table. This feature is indispensable when you need to include record data in the table. See Editing Table Items.
Columns
Use the Columns feature to split long tables into multiple, equal length sections. If a line table has three columns (Label, Bearing, Distance) and you specify 2 columns, you will get a second set of these same three columns to the right of the original three and all columns will half as many rows.
Decimal Places
The decimal places used for bearings/azimuths and distances in the table are determined by the current values in Tools, Program Settings, Decimals. After you change these decimal settings, you will need to regenerate the drawing to update the table.
TPC also uses these settings when you create a new table or open a drawing with a table in it.
Adding Extra Margin
You may find certain fonts will extend past the border of your point table.
An easy way to fix this is by adding some right margin to give your point table some extra width.
Related Topics
Drawing Tables
Editions
Premium, Professional
|