TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing Objects > Text > Inserting Text >

Adding a Drawing Title in Paper Space

 

 

 

 

This topic provides an example of adding paper space text to a drawing.

Generally, text like the drawing title and narrative should be created in Paper Space. As Paper Space objects, their position on the drawing is fixed relative to the nearest drawing corner. If you place the drawing title one-half inch down and one-half inch over from the upper left corner, then change the page size of the drawing. The drawing title will still be one-half inch down and one-half inch over from the upper left corner of the new page.

•Open the sample survey Learn Quick Text.trv. See Sample Surveys.

•In the Drawing View, using the Format toolbar, change the font to Times New Roman and the size to 0.20".

•Right-click any blank spot in the drawing and choose Modes.

•Make sure Paper Space Mode is turned on then left-click outside the pop-up menu to close it.

•Choose Draw | Text.

•Move the cursor to the upper left corner of the drawing. Watch the left side of the status bar where it reads Paper: X=0.8 Y=-0.5. These are the Paper Space coordinates and indicate the position of the cursor in inches to the nearest corner. As you move the cursor the values change.

•Position the cursor until the Paper Space coordinates read Paper: X=0.5 Y=-0.5.

•Left-click to establish the insert point of the text.

•Type LOT PIN SEARCH AND CONSTRUCTION and press [Enter] to advance to the next line.

•Type SETBACKS LOTS 2, 3 & 4 and press [Enter].

•Type SOUTHVIEW SUBDIVISION and press [Enter].

•Type FLORENCE, OR. and press [Enter] twice to end the command.


Related Topics

Inserting Text

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.