TPC 2026
TPC 2026

 

 

Navigation: Learning TPC >

Walk Through a GNSS Survey

 

 

 

 

The objective for Walk Through a GNSS Survey is simple – walk through the steps to do a survey with TPC and a GNSS RTK receiver.

•each step has a short video – some are a little longer

•we used an emlid Reach RS2+ GNSS receiver - see Emlid (CSV).

•see how TPC does common tasks like recalling points

We selected a simple GNSS survey where we find and mark the property corners and set a few points on line so the owner can build a dog fence.  We chose this example because it’s simple to understand, letting us focus instead, on some of TPC’s key concepts.

 


Introduction (1:51)

•Find existing property corners and set points on line so owner can build a dog fence.

•Est $500 to $700 depending on corner search time


1: Research (3:20)

•Address – Google Maps

•Visual – Google Earth via address

•Tax lot map – verify location

•Surveys – get all lot dimensions


2: Record Data / Corners (12:11)

•Enter block into TPC to get record locations for all lot corners

•Create one traverse

•Use Space Bar to repeat direction

•Edit Traverse View as needed until it closes – look for mistakes


3: Corner Search / Ties (8:46)

•Talk to neighbors – start at lot 20 pin

•Tie them as I find them

•North side pins – several disturbed

•East side pin – neighbor showed me where it was

•South side pins – GNSS issues


4: Survey Calibration (7:25) 

If you have emlid Flow PRO, it has a Localization tool you can use in the field for calibration.

•Default – use only fixed

•Evaluate – RMS float vs fixed

•Calibrate and check via stakeout report


5: Survey Decision (4:07)

•Use found monuments not record corners


6: Export Lines via DXF (5:06) 

If you have emlid Flow PRO, it can create the lines in the field for stakeout.

•Emlid flow needs lines to stakeout points on-line, but doesn’t have a tool to create the lines

•So we export the lines as a DXF from TPC to emlid


7: Set Points on Line (3:15)

•Show points set via emlid Flow


Related Topics

Learning TPC
Emlid (CSV)

 

 

 

Copyright © 2026 Traverse PC, Inc.