Traverse PC Land Surveying Software Redo › Forums › Support › Dual units or Grid to Ground conversion (single file)
Tagged: grid conversion, grid factor
- This topic has 1 reply, 2 voices, and was last updated 3 years, 11 months ago by
Anonymous.
- AuthorPosts
- December 12, 2019 at 3:03 pm #88898
aklinstiver
ParticipantIve got a survey that is in grid, bearings and distances, i created deeds in grid as requested but not some of the deeds are being requested to be in ground. I can’t see a simple way of changing my drawing units from grid to ground and also be able to create legal descriptions with ground and not grid using the same TPC trv.
I have tinkered with the Project Factors in the Survey Information menu but changing grid factors is not changing my drawings or traverses..
Any Ideas without having to scale my entire TPC file…
- December 12, 2019 at 3:18 pm #88909
Anonymous
InactiveEach view can be controlled individually. In the Traverse View, choose View | Format View and go to the advanced tab. You can set the options for that traverse there. In the Drawing View, choose Tools | Drawing Settings and set the options at the bottom of the Miscellaneous tab.
- AuthorPosts
- You must be logged in to reply to this topic.