Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • in reply to: Radial Bearings #101939
    Tony O’Rourke
    Participant

    Answer to my question is yes? is this correct? And I would specify the label under the sideshot traverse drawing settings or under the curve/spiral tab. In this case the the box is checked for showing rays, and the label for the rays is ghosted out? Suggestions?

    in reply to: Closure Data Labeling #101548
    Tony O’Rourke
    Participant

    CAN WE ADD FOR CLOSURE “COUNTY SURVEYOR” STACKED LABEL TO BE; Relative: 1:15428,
    Linear:0.05 Feet,
    Direction:N14°52’46″E,
    Northing:-0.05 Feet
    Easting:-0.01 Feet
    I WOULD LIKE TO HAVE LAT/DEP AVAILABLE IF NEEDED AS WELL.

    I THINK THIS SHOULD WORK FINE.

    TONY

    in reply to: Legal Description Generator #79121
    Tony O’Rourke
    Participant

    I figured it out, one suggestion when you have time please give me a call to discuss.

    Thanks
    Tony

    in reply to: Legal Description Generator #79107
    Tony O’Rourke
    Participant

    I just noticed that my bearings are state plan not true bearing mean course, How do I change the export format in the legal description generator?

    in reply to: Legal Description Generator #79092
    Tony O’Rourke
    Participant

    John/Mark

    I used the text box, drag over the drawing area I wanted. I inserted “pasted” legal description in text box area which seemed to control the text width better. Any other suggestions?

    in reply to: Radial Closure #45610
    Tony O’Rourke
    Participant

    Thanks!

    in reply to: Radial Closure #45545
    Tony O’Rourke
    Participant

    I’m to include with the standard curve info radius, arc length, Delta etc. and the radial bearing in and out of a curve? far as I can tell.

    PC->RP Bearing= N 61-39′-10″ W
    RP->PT Bearing= N 31-07′-01″ E

    in reply to: Radial Closure #45496
    Tony O’Rourke
    Participant

    Yeah, that makes two of us! I’ll send an example once received.

    Tony O’Rourke
    Participant

    Thanks Mark, I’ll try that tomorrow and let know.

    in reply to: Updating directory for your templates #39268
    Tony O’Rourke
    Participant

    Thanks John, it worked!

    Tony

Viewing 10 posts - 1 through 10 (of 10 total)