Checking your closure should be easy, and with TPC, it is
Resources
Sneak Peek
Checking Closure (5:06)
0:30 Include the area in a drawing
0:47 Check the closure of a lot
1:26 The Closure View is a snapshot of the traverse
1:41 Show the lot closure and area in the Closure View
2:16 TPC computes an area because its a Closed Loop
2:40 Closed Loop tolerance automatically sets Closed Loop
3:40 Show the lot closure and area in the Traverse Manager
Closure View
Accessing the Closure View
- Access the Closure View from the TPC Desktop, Traverse Manger and Traverse View.
Closure Settings
- Edit the closure settings of a traverse.
Understanding Closure Information
- Explains each of the sections in the Closure View.
Reporting Closure
- Send selected traverses to the Traverse Report
- Include just the traverse and error summaries
- Include the traverse data also
- Report area, linear and relative errors from the Traverse Manager
- Print them
- Edit the Traverse Manager format to change the printout
- Report area, linear and relative errors from the Traverse Manager
- Add them to a report
- Edit the report to show just the traverses I want
- Export them as a CSV file
Automatic Traverse Closure
Here are some tips you can use with any data collector to tell TPC exactly how you closed a traverse. Using =[point] in the point description, TPC knows exactly what you did. So close out on =1 and turn an angle to =101 and TPC will know you closed on point 1 and turned an angle to point 101.
Automatic Closure Settings To Backsight + Closing Measurement (3:22)- Close back to your backsight and add a closing measurement.
- Close back to your backsight and add a closing angle.