TPC 2026
TPC 2026

 

 

Navigation: Alignments >

Alignments Are Defined by Traverses

 

 

 

 

In TPC Desktop, alignments are defined by traverses.  These traverses can define just the horizontal components of the alignment or both the horizontal and vertical components.


Formatting the Traverse View for Alignments

You include the alignment data you want via the Traverse View Format.  In this example, the Radius and Arc Length are included in the format.  This defines the horizontal alignment.

To define the vertical alignment of this traverse, you would include vertical components like Grade, Vertical Angle or Elevation and include the vertical PIs (Points of Intersection) along with their station and elevation.


Adding Stationing

If you want to include stationing, just add it to the traverse view format and enter any station-equations you may have.

See Stationing an Alignment.


Civil3D / LandXML Example

Here is a LandXML file imported from Civil3D that contains 6 alignments, shown as a dashed black line, and with the loop alignment delineated in the drawing.  On import, TPC created a traverse for each defined alignment, using the alignment name as the traverse name.

 

Here is the loop traverse displayed in the Traverse View.  Notice the PC / PT point types that define the beginning and ending of the horizontal curves, the Stations, Radius, Arc Len.. and Delta values.  Also notice that all elevations are zero, indicating that Civil3D was working with just the horizontal component of these alignments.


Example Alignment Traverse

For an example of how to format an alignment traverse and the alignment details displayed, see Example Alignment Traverse.


Related Topics

Alignments
Example Alignment Traverse
Stationing an Alignment

Editions

Personal Premium, Professional

 

 

 

 

 

 

 

 

 

Copyright © 2026 Traverse PC, Inc.