TPC can station an alignment, inserting station point at specific tangent and curve/spiral intervals. TPC ensures that a station point exists for each interval.
To create individual stations on an existing alignment, use the Station Offset tools and specify an Offset of 0.0.
Selecting an Alignment Traverse
The alignment you station must be defined by a traverse. Once you have this alignment traverse, you can station the entire traverse or just a portion of it using the What list.
Creating a Copy to Hold the Stations
When TPC stations an alignment traverse, it first makes a copy of that traverse, then inserts the station into the copy traverse. TPC does this to maintain the integrity of the original, alignment traverse. If this original traverse has raw data, inserting stations, which are control points, would cause the traverse to recompute incorrectly, using the stations and any raw data in the traverse. Making a copy first eliminates this possible issue.
Defining Station Distance
In imperial units, stations are always 100 feet, but in metric, they can be defined as 100 or 1000 meters.
In TPC, you establish this value in the Program Settings, Units dialog.