Any traverse can be stationed just by including the Station column in the display sequence. You can also include an equation column, allowing you to manually enter station equations.
Once a traverse has computed its stationing, you can then use COGO tools like Station/Offset which creates a left or right offset at a given station along the alignment.
Station Syntax
TPC uses the + symbol for stations. So 50+00 is 50 stations plus 00 additional units.
You enter 50+00 as 50+00 or just 50+. You can also enter it as 5000 which the station in distance units and TPC will convert it to 50+00 stations. As with any distance, the period indicates a fraction of a unit, so the station 50+12.5 would be entered as 50+12.5 or 5012.5.
The decimals you specify tell TPC to round off the stationing to that many decimal places. TPC also removes any trailing zeros and periods. This creates shorter station labels that fit more compactly onto your drawings.
For example, if you specify 3 decimals for stations.
1+30.000 is displayed as 1+30
1+30.120 is displayed as 1+30.12
1+30.123 is displayed as 1+30.123
Station Factor
In the Units tab of the Program Settings, you can select a station factor of 100 or 1000. As a rule, both metric and imperial units use the 100 factor, but some metric stationing is specified as 1000 meters per station. This option allows you to work with either definition.
Including Stations in a Traverse
In the Traverse View, press F9 and select the Format tab. In the Display Sequence, include the letters N for stations and O for station equations. Once these columns are included, TPC will compute the stationing for the traverse and display it in these columns.
Station Equations
TPC allows you to display a Station Equation column in the Traverse View and enter forward equations in it. Once entered, TPC will display the computed station for that point in the Station column and the Station Equation it will use as it computes stations from that point forward (to the end of the traverse).
You can include any number of station equations in a traverse, but on one station equation can be entered for any one traverse point.
Slope Distance Stations
In the Traverse View, you can choose View, Format View and select the Advanced tab. You will see the [ ] Display Slope Distance Stations toggle. If you turn this on, TPC will compute stations using the slope distances of the traverse alignment. If this option is turned off, stations will be computed based on the horizontal distances along the alignment.
Regardless of how this toggle is set, TPC displays both the horizontal and slope lengths of the traverse in the Closure View.
COGO Stations Command
The Station command creates a new traverse that contains the original alignment, but also includes station points at each station specified by the station interval you select.
•Enter the Traverse View for the alignment you want and choose COGO | Stations.
•Enter the stationing you want for tangents and curves/spirals.
•Enter the tolerance and descriptions you want to use.
•Choose Compute.
The Tolerance field tells TPC not to create a new station point if the survey already has a point within the tolerance of the specified station.
Grid vs Ground / Geodetic
The stations are computed based on the distance type of each alignment traverse.
For example, if an alignment traverse is formatted for ground distance at project elevation, stations will be ground distance at project elevation. So you can create stationing for grid, ground or geodetic.
The stations computed and displayed for a traverse can be used in a legal description written for that traverse. See Adding Stations to Legal Descriptions.