When you receive one or more CAD files for a project, you can decide how best to use that file in TPC.
Using Existing CAD Files (4:51) - Open a CAD file in TPC Desktop 2016, explore layers and entities, then send selected entities over to the Drawing View.
Common Workflows
You get project CAD files for any number of reasons. You are asked to do some stakeout, or provide a description for an easement, or find and mark lot corners. The list goes on and on.
So what do you do with that file? Do you import it into a drawing, insert it as an XReference into a drawing, open it in the CAD View.
Those are all great options, but it all depends on how you plan to use that CAD file.
Reviewing it in the CAD View
Open and review existing CAD files - look for specific layers and entities.
•Change CAD file formats, like converting a DXF to a DWG.
•Add your selected survey objects from one of your TPC drawings to an existing CAD file, then save the changes back to the original file.
•Send selected entities from a CAD file in the CAD View to a TPC drawing.
•Send selected drawing objects from a TPC drawing to the CAD file in the CAD View.
•Use TPC's calibrations to use and exchange data with a CAD file that is not on the same grid as your survey.
•Preview a TPC drawing exported to CAD before you send it to the client.
If you do any of these things just listed, the CAD View will be indispensable to you.
Pan and zoom to the parts of the drawing you need, then list entities to check for the information you need. Isolate layers to bid part of the project or verify the dimensions of a feature. You can do that in the CAD View