TPC 2026
TPC 2026

 

 

 

 

 

This chapter will show you how to compute a geodetic Bearing-Bearing intersect for the center 1/4  (540440G). Actually, this is not a geodetic computation involving two geodesics (great circles) but a PLSS computation on the latitudinal arc between the east-west quarter corners. They are not the same.

 


Getting Started

•From the Tasks Manager choose Sample Surveys.

•Choose Learn PLSS Center Section.trv and click Open.

•Choose File | Save Survey As.

•Enter PLSS Center Center Section.trv as the File Name and choose Save.

If prompted to replace the existing file, choose Yes.


Compute the Geodetic Center Section

Let’s start by computing the geodetic center section per the PLSS.

•From any view choose COGO | Intersect

•Enter the North-South line in the Point 1 section of the dialog.

•From: use [>] to select point 540500

•Bearing: enter 540500..540400. This dialog has geodetic options and recognizes that you are working in True Bearing so you will see the bearing S0°16'38"E

If the top bar of the Intersection dialog box does not display True Bearing, Geo Dist, Feet, click the Show Options button to display and change the Distance and Direction options.

•Enter the East-West line in the Point 2 section of the dialog

•Beginning of line: use [>] to select 600440

•End of line: use [>] to select 500440. Again, TPC displays the true bearing.

Because we are working with geodetic options, the [x] Latitude Arc option is already turned on for you.

•Notice that field 1 in Computed Intersections turns from gray to white, indicating that it has been computed.

•Save the computed intersect

•In Computed Intersections, field 1, enter 540440G.

•Choose Edit and enter Geodetic Center for the Description.

•Turn on [x] Hold geodetic, then Ok.

•Choose Save and say Yes.

•Choose Summary to write the intersection computations to the Report View.

 


Intersection Summary

Open the Report View and look for the intersection summary. It will be at the bottom of the report.

Let’s take a look at this summary.

The summary repeats the information in the Intersection dialog, plus includes additional information about the points used to compute the intersection. You’ll see their coordinates, geodetic positions, convergence and grid factors listed.

Then notice the following line:

Line From 600440 To 500440 @  (Geodetic Arc 42°42'09.503"N)


Because this intersect is on a geodetic arc, it is a geodetic intersect per the PLSS. Later, when we compute a planar center section, the summary will not include the geodetic arc.

 

 


Adding the Center Section to the Retrace Traverse

Now let’s include the computed center section in the retrace traverse. This will provide inverses to adjacent corners plus draw the corner in the current drawing.

•In the Traverses Manager, open the Sec 14 Retrace traverse.

•Highlight 540500 and press [Insert]

•Enter 540440G and press [Enter] twice.

•Press F10 to change point 540440G to a sideshot.

 


Related Topics

Computing a Center Section with PLSS Data

Editions

Professional

 

 

 

 

Copyright © 2026 Traverse PC, Inc.