TPC 2026
TPC 2026

 

 

 

 

 

For comparison sake, let’s compute the planar center section and compare its position with the geodetic center.

•If the intersection dialog is not open, from the TPC Desktop, choose COGO | Intersect

•Opening any COGO dialog from the desktop re-opens the previous dialog without changing / inserting any new data. So the dialog still holds the geodetic center quarter

•If the geodetic Options are not displayed, click Show Options.

•Set the Distance option to Grid Dist (grid or local Cartesian coordinates).

•Choose OK when TPC tells you that You must select a geodetic distance to use Latitude Arc.

•TPC automatically turns the [ ] Latitude Arc option off.

•Set the Direction option to Grid Bearing (grid or local Cartesian coordinates).

•You will need to recall the Bearings used in the From and To sections of the dialog to use the correct non-geodetic bearings.

•Save the planar intersection

•In field 1, change the G to P (540440P)

• Choose Save and say Yes.

•Choose Summary to write the intersection computations to the Report View.

Note: This summary does not reference a Geodetic Arc because it is a planar intersection.


Plotting the Planar and Geodetic Positions

Now let’s compare the two center sections.

•Choose Plot next to the Save button for point 540440P.

•The Plot button adds the point to a special Point Plot traverse so you can see it in the drawing. We use this to verify COGO points without the need to add them to a traverse.

•In the Drawing View, choose View | Zoom | Window Extents and window in around the center section. You may have to do this more than once to get the separation shown here.

 

This is a special command that refines the drawing extents down to a smaller search area for comparing points that are very close to each other. To cancel this command, choose Zoom Extents.

Note: we just drew a grid line between the coordinates of the east and west quarter corners, so 540440P lies on the grid line and 540440G lies below it. How this line is drawn is a drafting issue and does not affect the computation of the center quarter.


Related Topics

Computing a Center Section with PLSS Data

Editions

Professional

 

 

 

 

Copyright © 2026 Traverse PC, Inc.