TPC 2026
TPC 2026

 

 

Navigation: Calibrating Data > Calibrating CAD > Calibrating CAD Files >

Calibrating a CAD File on Export

 

 

 

 

You can export a CAD file from a TPC drawing and select an existing calibration, usually reversing it.  TPC uses that calibration to change the the CAD file entities being written from your survey's grid to the CAD grid.

 

Export Calibrated CAD File (2:54) - Once you have created a calibration between your survey and another coordinate system used for CAD, you can easily export a TPC drawing to that original CAD coordinate system.


Calibrating Smart Drawing Objects

TPC uses a unique algorithm to calibrate CAD drawings on export.  It is not used anywhere else in the program.

Although first introduced in TPC 2019 R1, additional work has been done to improve the exported CAD files.

TPC 2023 R1, added more smart drawing objects to this algorithm.  These include the following

•Leaders for survey point and line labels

•Dynamic Offsets

•Dimensions

•Interior Angles

•Crowsfeet

 


Improving Your Results

If any part of the drawing you are exporting is not calibrated, you should be able to identify it in any CAD viewer, including TPC's CAD View.  Just do a Zoom Extents in the CAD Viewer and see if you have two coordinate systems in the same drawing.

To improve the results of a calibrated export, consider calibrating the survey first, then exporting the CAD file.  You would then need to uncalibrate your survey or just close the survey without saving it.  Then check your exported CAD file to see if it look better.


Related Topics

Calibrating CAD

 

 

 

Copyright © 2026 Traverse PC, Inc.