TPC 2026
TPC 2026

 

 

Navigation: Calibrating Data >

Calibration Workflows

 

 

 

 

What do you do when you get data that doesn't match your survey's coordinate reference system (grid)?  You know, grid to ground, state plane to local, metric to imperial, inches to feet and the list goes on.

In TPC, you just calibrate it.

Calibrations use Least Squares to fit any coordinate system to another coordinate system. User can then forward/reverse calibrate between the two plus use any existing calibration as the Site Calibration for a survey.

TPC Desktop computes a least squares transformation that lets you use as many point pairs as you need to get the exact fit you need.  Data is rotated, translated and scaled to best fit your survey. Then, when you need to send your survey back to the other coordinate system, just reverse calibrate it. Pretty simple.

Here are some typical calibration workflows.


Calibrating a Photo (4:49)

When you calibrate a photo to your survey, pick as many point pairs as you can find on the photo, then let TPC Desktop's Least Squares calibration routine create the best fit for you.

TPC Desktop even generates a world file for the photo, so that when you insert it into the next drawing, it comes in at its calibrated position - automatically.


Calibrating an XRef to a Drawing (4:48)

TPC Desktop makes it so easy to work with CAD files, regardless of whether or not its coordinate system matches your survey.  Just calibrate the file to your survey, then bring calibrated CAD data into your survey and reverse calibrate to send data back out to the grid used by the CAD file.

•0:00 We have a DWG file that is not on the same coordinate system as our survey

•1:07 Create a calibration with point pairs

•2:50 Enter information about the calibration for future reference

•3:30 Save the calibration to a file

•4:22 Reuse the calibration any time


Export Calibrated CAD File (2:54)

Once you have created a calibration between your survey and another coordinate system used for CAD, you can easily export a TPC drawing to that original CAD coordinate system.


Site Calibration with Google Earth (10:12)

TPC Desktop's Site Calibration is pretty amazing.

Use any existing calibration as the Site Calibration or create a new one, and TPC Desktop will automatically calibrate GNSS data to your survey's Coordinate Reference System, whether its based on local site coordinates like 5,000 / 5,000 or a projected grid like State Plane, UTM or your counties low distortion datum.

GNSS points always retain their original geodetic positions, but take on calibrated coordinates, so they plot right over the top of your survey and work for all COGO computations like offsets and inverses.

In the example here, we identified some lot corners in Google Earth, imported them into TPC Desktop, created a calibration to tie Google Earth to our survey then selected it as our Site Calibration.

•Calibrate geodetic points to your local site survey

•Plot your local site data directly in Google Earth

•Create points and figures in Google Earth and plot/use them in your local site survey

This example uses geodetic positions from Google Earth, but think about it, geodetic positions from any GPS, GNSS or GIS can be calibrated exactly the same way, making it a breeze for TPC Desktop to work seamlessly with that data.


Taking a Deeper Dive into Calibrations (52:50)

Whether you can calibrating a background photo to your survey or ground shots from your total station to your survey's State Plane grid, the steps are the same.  Learn how to do one, and you can do all the rest.

•Photos (2:00)

•Selecting point pairs vs series

•Select any number of points - Least Squares best fit

•TPC automatically creates the world file for the photo

•XRefs (7:50)

•Calibrate using an existing calibration file

•Associations let us work between the survey coordinates and the drawing coordinates

•Total Station Data (14:50)

•Assumed location

•Get point pairs from traverse data

•Calibration properties

•Applying a calibration

•Survey Calibrations (22:00)

•Can be reused

•Stored in a .cal file

•Saved with the survey's TRV file

• GNSS Options (23:27)

•Base station (assumed Here position) with ties to known control

•CORS /OPUS -post processed data that ties known control

•Calibrate to custom projection (low distortion) or local site

•Site Calibration Example (32:36)

•South Coast Water District

•Preliminary planning for water line easement

•Wrap-up and Review (44:04)

 

 

 

 

Copyright © 2026 Traverse PC, Inc.