The Closure View is dedicated entirely to reporting closures and adjusting coordinates. It's your one-stop-shop for closure and adjustments. Here are some typical workflows.
Checking Closure and Adjusting Coordinates (8:42)
VIDEO
Checking lot closure is easy with TPC Desktop. Just open the Closure View!
• Check the closure of a lot in the Closure View
• The Closure View is a snap shot of a traverse
• Checking and setting the closing points
• Including lot areas in the Traverse Manager
• Balance coordinates to remove linear error
• The Traverse View now shows adjusted bearings and distances
• But the raw data is still available
Reporting Lot Closure (2:54)
VIDEO
Reporting the closure of lots is easy with our Traverse Report.
• Send selected traverses to the Traverse Report
• Include just the traverse and error summaries
• Include the traverse data also
Adjusting Coordinates and Raw Data (3:35)
VIDEO
TPC Desktop includes all the traditional adjustments like Compass Rule, Transit Rule, curvature & refraction and more.
• Adjust coordinates to eliminate error
• Compare adjusted data vs raw data in the Traverse View
• Undo the adjustment
Converting Between Grid and Ground (5:01)
VIDEO
• 0:25 Import ground coordinates from an ASCII file
• 1:09 Project combined (grid + elevation) factor
• 3:09 Details of import and transformation