TPC 2026
TPC 2026

 

 

Navigation: Checking Closure >

Closure Types

 

 

 

 

The three closure types used by TPC are defined as:

Open

Open traverses may start at a known point, but end at an unknown point. Open traverses cannot be balanced, but can be adjusted for curvature, refraction, and horizontal distance factor.

Closed Loop

Closed loop traverses begin and end at the same occupied point and in most cases, use the first course of the traverse for the closing angle.

TPC uses the Closed Loop Tolerance to determine whether or not a traverse is a Closed Loop. A tolerance of 10% would consider any traverse with a 1 in 10 error of closure to be a Closed Loop. Once you specify a closure type manually, TPC no longer uses the Closed Loop Tolerance.

Closed Point-to-Point

Closed point-to-point traverses begin and end at different known points and can include a closing angle to any known point or bearing/azimuth. TPC cannot compute the correct closure errors until you tell it the correct closing point (choose Edit | Closing Points).


Editing Closure Type

You can change the closure type in the following views.

Closure View

•Choose Edit | Closure Settings | Closure Type to display the Closure Type dialog. Select the closure type you want and choose OK.

Traverses Manager

•Right click any traverse and choose Traverse Properties.

•Select any traverse and choose Edit | Traverse Properties.

Traverse View

•Choose Edit | Traverse Properties.


Related Topics

Checking Traverse Closure
Closure View

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.