TPC's Average Point routing computes the average of a selected set of points.
The average position can then be used as the Project Location and help set the elevation, combined factor and mapping angle for the project.
You may also have used other software that scales between grid and ground coordinates about a base point. The average point you compute can be used for that base point also.
COGO: Average Point (3:28) - Use the new Average Point COGO routine to compute your Project Location, elevation and Combined Factor for Ground to Grid.
Like most COGO commands, you can select what survey data to use for the average point computation. You can select the data you want to use prior to using the Average Point command or afterwards, from the Average Point dialog.
Average Point Dialog
This command displays the Average Point dialog where you specify which survey points to include in the average before you compute it.
From this dialog, you can select, compute, view and review the average until you get the one you want. Then you can use the computed average a number of ways and even save the average computation as a traverse for later reference.
Saving the Computed Average
Once you compute an average, you can save it as a survey point. TPC will add it to the survey, sorting it based on the label you give it.
Once saved, you can then use the computed average point like you would any other survey point.
Saving the Average Computation as a Traverse
From the Average Point dialog, press the Save Traverse button to create a new traverse to reference how the average point was computed. TPC inserts the computed average into the traverse as the first control point, then inserts all the survey points used to compute the average as side shots, all originating from the computed average point. When plotted, this will show how the average was computed.
Updating the Survey's Project Location
Once you compute an average, you can press the Update Project Location button in the Average Point dialog. TPC will copy the computed average point into the survey's project location.
Reporting a Computed Average
Once you compute an average, you can report how it was computed with the Summary button in the Average Point dialog. TPC lists each survey point used to compute the average, along with the number of points and the average coordinates.
Updating a Computed Average
You can update a computed average anytime by recomputing a new average, then recalling the previously computed and saved average point in the Point field of the Average Point dialog. TPC will ask if you want to update its current position with the newly computed average.