TPC 2026
TPC 2026

 

 

Navigation: Surveys > Survey Information >

Survey (Project) Location

 

 

 

 

One of the survey's Project Factors you can specify is the Project Location.

TPC uses the project location in a number of ways.

•It can compute the Mapping Angle to used for the project.

•It can compute the Combined Factor used for the project.

•It can be used as the Base Point in the Coordinate Conversion routine, scaling all points towards or away from it.  This routine easily converts coordinates between grid and ground.

•If you select either the ground distance or geodetic distance options which are based on project elevation, TPC assigns the project elevation to any new survey points it creates.


Project Factors Dialog

You can enter a project location in the survey's Project Factors dialog.

Enter an existing point label

In the Project Factors dialog, enter an existing point label to use the position of that point as the survey's project location.  TPC copies the position of the point and uses it as the new project location.

Once you enter a coordinate or geodetic position, TPC will remove the point label (it will be blank) indicating that the position is now different than the existing point.

Entering coordinates vs geodetic positions

When you enter coordinates, TPC holds those coordinates as the as the project location. TPC is free to transform that coordinate position into a geodetic position as needed and will use whatever CRS is current at the time to do the transformation.

When you enter a geodetic position, TPC holds that geodetic position as the project location. TPC is free to transform that geodetic position into grid coordinates as needed and will use whatever CRS is current at the time to do the transformation.


Creating an Average Point

You can create an average point for your survey and use it as the project location. See COGO - Compute Average Position.

TPC lets you select the entire survey or any points or traverse you want to compute the average position. You can then assign this to the survey's Project Location.

Creating an average point is useful if you have significant elevation changes over your survey. In this case, selecting an existing survey point for the project location may give you a reasonable horizontal position, but a marginal elevation. In this case, the computed average position will better represent the various elevations in your survey.

 

Average Point (Project Location) (3:28) - See how to create ground coordinates for stakeout from a BLM PLSS (geodetic) project with grid coordinates.


Elevation

The average project elevation in feet (if survey units are feet or chains) or meters (if survey units are meters).

This is applied only when you select the distance type Ground Dist (at project elevation xxxx.xx) and Geo Dist (at project elevation xxxx.xx).

Beginning in TPC Desktop 2011, if you specify a project elevation and set the default distance type to geodetic or ground distance at project elevation, the default elevation for any new survey points you create will be the project elevation.


Related Topics

Surveys
Task Manager

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.