The rotation dialog box can be accessed from the Traverses Manager, Traverse View, Drawing View and Points Manager. From the Traverses Manager it gives you the option to rotate All Traverses or Selected Traverses. Accessed from the Traverse View or Points Manager, you can only rotate All Points or Selected Points. Accessed from the Drawing View, you can only rotate the Entire Survey.
•Enter the Degrees of rotation (positive is clockwise, negative is counter clockwise) or enter the bearing or azimuth you want to rotate From and To. Remember that bearings or azimuths between existing points can be recalled by entering a point label followed by .. then the second point label.
•From the Rotate What box, choose Entire Survey.
•Choose OK.
Every point in the survey will be rotated around the specified point of rotation. Protected points will not be rotated unless you choose [x] Protected Points.
Rotating Selected Traverses
This ability to select traverses is a very powerful feature of TPC. In this case, you may need to rotate two traverses based on one survey to the basis of bearing to which the rest of the survey is oriented.
•In the Traverses Manager, select the traverses you want to rotate.
•Enter the Degrees of rotation (positive is clockwise, negative is counter clockwise) or enter the bearing or azimuth you want to rotate From and To. Remember that bearings or azimuths between existing points can be recalled by entering a point label followed by .. then the second point label.
•From the Rotate What box, choose Selected Traverses.
•Choose OK.
Rotating a Single Traverse from Drawing View
•Right click any object drawn by the traverse you want to rotate (a point symbol, line, line label, etc) and left click Traverse Tools.
•Choose Rotate. TPC displays the Rotate dialog for this traverse.
•From the What List, choose Entire Traverse: name (name of the traverse you clicked)
•Enter the Degrees of rotation (positive is clockwise, negative is counter clockwise) or enter the bearing or azimuth you want to rotate From and To. Remember that bearings or azimuths between existing points can be recalled by entering a point label followed by .. then the second point label.
•Enter the Degrees of rotation (positive is clockwise, negative is counter clockwise) or enter the bearing or azimuth you want to rotate From and To. Remember that bearings or azimuths between existing points can be recalled by entering a point label followed by .. then the second point label.
•From the Rotate What box, choose Entire Traverse.
•Choose OK.
Rotating Selected Points
•In the Traverse View or Points Manager, select the points you want to rotate.
•Enter the Degrees of rotation (positive is clockwise, negative is counter clockwise) or enter the bearing or azimuth you want to rotate From and To. Remember that bearings or azimuths between existing points can be recalled by entering a point label followed by .. then the second point label.
•From the Rotate What box, choose Selected Points.
•Choose OK.
Grid vs Geodetic
The Rotation dialog does not require the distance and direction types to match. TPC always does a grid rotation. It computes the pre-rotation grid azimuth, adds the rotation degrees to it and recomputes a new grid position based on the post-rotation grid azimuth.
TPC uses the direction type of the Rotation dialog to display the appropriate azimuths or bearings used for the rotation, but relies on the grid rotation for the computations. The distance type of the dialog is not used in the rotation computation.