TPC 2026
TPC 2026

 

 

Navigation: COGO > Fitting Lines and Curves > Horizontal Curve Fitting >

Fit Horizontal Curve dialog

 

 

 

 

Enter the Horizontal Curve Fit Dialog by highlighting the points in the Traverse View that you want to include in the curve fitting computations. The highlighted points must include the First (PC) and Last (PT) points of the resulting curve.

What

Use this list to select a range of selected points in a Traverse View.

First, Last

Identifies the first and last points in the range of points that will be used to compute the best fit line.

The end points of the best fit line TPC computes will be as close as possible to these points. So First and Last, in effect, help define where the end points of the computed line will be.

When you select the Average option, the First point is the PC (Point of Curvature), the Last point is the (Point of Tangency) and all the points in between are assumed to be POC (Points On the Curve).

Options

Select the type of best fit computation you want to use.

Least Squares

Uses least squares to compute the best fit curve. This is a minimally constrained solution that allows TPC to compute the end points of the best fit curve.

Average

The option assumes that the First point is a PC and the Last point is a PT. TPC then computes the radius of each point as if it were a POC. The average of these radii is displayed as the Radius.

Radius

Initially, the dialog displays the computed radius. The radius is then updated as you modify the What list or enter First and Last points.

You can change it to whatever radius you choose, provided it is at least half the chord length between the PC and PT.  For example, if TPC computes a radius of 29.54, you might want to reenter a radius of 30.

Compute

Select this button to do the selected best fit line computation.

Summary

Displays the most recent best fit curve computation in the Report View.

TPC provides information about the points that were selected, the best fit curve that was computed and the offsets of each of the selected points from the best fit curve.

Close

Closes the dialog. The current computations are retained, so you can re-open the dialog and continue where you left off.

Apply Radius

TPC inserts the curve, specified by the Radius, into each of the selected points from First to Last. This action modifies the traverse data.

This command is only available if you have selected points from a traverse or selected an entire traverse. The What list option must display 'Entire Traverse:...' or '.. selected points in traverse'.

Note: curves are stored internally with the survey. So if you establish a curve between two survey points, like 34 and 35, recalling those same two points elsewhere in TPC will recall that same curve.

Undo

Undo the last Apply Radius.  TPC restores the lines and point types of the computed points.

Computed Points (Least Squares Only)

If you have selected the Least Squares option, each time you choose Compute, TPC computes the best fit curve and places the end points of that line into the computed points. You can create new points for the line endpoints by entering new point labels or you can update existing points by recalling their labels.

Once you have labeled the computed points, you can Edit, Save and Plot them.

Create unique point labels on Compute

If you turn this on, TPC will label the Computed Points 1 and 2 using the From and To points in the dialog. You can still change these automatic labels if you want.

If the From point is 200, TPC will create the label 200:1 for the Computed Point 1. If 200:1 is already used, it increment the created label to 200:2 and so on until it finds a label that has not yet been used.


Related Topics

Horizontal Curve Fitting
Entering Horizontal Curves
Horizontal Line Fitting
Entering Equations
 

 

 

 

Copyright © 2026 Traverse PC, Inc.