TPC 2026
TPC 2026

 

 

Navigation: COGO > Using COGO >

Using COGO in the Traverse View

 

 

 

 

When you use COGO in the Traverse View, many COGO operations happen automatically.

You can do things like

•insert a midpoint

•extend a line

•recall a bearing or distance

•recall the last bearing or distance

•start a tangent curve or spiral

•recall the outgoing tangent bearing from a curve or spiral

 


Inserting a Midpoint on a Line or Curve

Many COGO functions happen automatically, almost without you thinking about them. Mid points work this way.

•Open the Learn COGO.trv sample survey file. See Sample Surveys.

•Double-click the Cul-de-Sac traverse in the Traverses Manager.

•From its Traverse View choose Tools | Draw This Traverse Only.

•Right-click point 6 and Insert New Point | Above Selected Item or just press [Ins].

Traverse PC inserts a point halfway between point 6 and point 4 and labels it 4:1.

•Right-click point 7 and choose Insert New Point | Above Selected Item or just press [Ins].

Traverse PC inserts a point at the midpoint of the curve between points 6 and 7 and labels the new point 6:1.

TPC also computed the average elevation for the inserted point.

Once a point is inserted along a straight line or a curve you can always change its position using the COGO | Compute Coordinates and other commands. The halfway feature gives you a place to start.

Note – If you insert a midpoint in a traverse that contains raw data and then choose Tools | Recompute, the midpoint will remain in its original location while the next point’s coordinates are recomputed based on the raw data for that point. If you wish to prevent this from happening, you will need to protect all the points in the traverse by choosing Edit | Select All followed by Edit | Modify Points | Protect On. Another option would be to create raw data for the current point configuration by choosing Tools | Update Raw.

•Close this Traverse View by left-clicking the [X] in the upper right corner of the view.


Recalling Data from the Previous Point

As you enter field data in the Traverse View, TPC Desktop automatically creates traverse points as needed, assigning an initial point label and initial coordinates to the created points.

TPC also remembers the data from the previous point in the traverse. If you want to extend a line, press the space bar with the cursor in the bearing column. TPC will enter the previous bearing/azimuth for you and then just enter the next distance. Traverse PC will keep the bearing/azimuth and extend the traverse by the distance you specify. If the previous point is the PT of a curve, TPC will recall the outgoing tangent bearing of the curve.

 

•Open the Learn COGO.trv sample survey file. See Sample Surveys.

•Double-click the Curves traverse in the Traverses Manager.

•In its Traverse View choose Tools | Draw This Traverse Only.

•Press the down arrow key on your keyboard until Traverse PC inserts point 24 after point 13 at the end of the traverse.

•Click in the Bearing field of point 24 to make it the active field.

•Press the spacebar to recall the outgoing tangent bearing of the curve from point 12 to point 13 and press Enter.

•Press the spacebar in the Horiz Dist field for point 24 to recall the Horiz Dist from point 12 to 13 and press Enter.

 

TPC creates point 25 after point 24. The line from point 13 to point 24 is on the outgoing tangent bearing of the curve. Point 24 is the same distance from point 13 as point 13 is from point 12.

You can recall data in this manner in any field where data is available for the previous point. (You could not recall a radius if the previous point was not the PT of a curve for example.)


Related Topics

Using COGO

 

 

 

Copyright © 2026 Traverse PC, Inc.