To delineate an Drawing Data Manager object in the drawing, right click any object and choose Delineate Object.
TPC looks for that object in the drawing and delineates it. If the object is not displayed in the drawing (because it is untagged or hidden), the object can not be delineated.
This command will not work unless a Drawing View is open, or can be opened by the command when it is executed.
Once you have delineated an object in the Drawing Data Manager, you delineate other drawing objects just by selecting them in the Drawing Data Manager.
For example, if you delineate the TPCPointLabels layer from the Drawing Data Manager and then decide it would be better to delineate a particular traverse that you think is drawing that point, you can just select that traverse in the Drawing Data Manager and TPC will 1) turn off the TPCPointLabels layer delineations and 2) delineate the selected traverse.
Turning Off the Current Delineation
You can un-delineate the current object being delineated and turn off further delineation as follows
•Execute the Delineate Object command again, either from a menu or toolbar.
•Left click a Drawing Data Manager primary node like Layers, Traverse, Blocks, etc.
•In the Drawing View, turn off the particular delineation button if active, line Delineate Traverse if a traverse was delineated from the Drawing Data Manager.
If you include XReferences in a drawing, you have the option of delineating the entire Xreference or individual layers within it. This is a very handy way to determine which layers in the XReference contain the CAD objects you are interested in.
To delineate an XReference in the Drawing Data Manager
•Expand the Layers node
•Locate the XReference in the layer list. You can select it and choose the Delineate Drawing Data Manager Object command.
•You can also expand the XReference node and select any layer in the XReference to delineate just that layer.