TPC 2026
TPC 2026

 

 

Navigation: Using CAD > Using CAD Files >

Export Layer Options

 

 

 

 

TPC creates layers based on entity layer names, traverse layer names or both.


Layering by Traverse

Let’s say that you have the following traverses in your survey and that you want to put all the data for the lots onto a layer called “Lots” and all the as-built data onto a layer called “AsBuilts”.   See Traverse Layers.

•In the Traverses Manager, choose Tools | View | Format View.

•Include the letter 'L' (for Layers) in the Display Sequence and choose OK.

•Enter “Lots” in the Layer column for the lot traverses.

•Enter “AsBuilts” in the Layer column of the AsBuilts data traverse.

Note: To see which layer name each traverse is using, include the letter L in the Traverses Manager format.

You can also edit traverse layer names in the Traverse Properties dialog.

Turn on [X] Use Traverse Layers in the Settings dialog before you export the file.

Note: If you have Traverse Layers turned on in the drawing, [X] Use Traverse Layers will be deactivated, allowing the drawing settings to control the layers.


Layering by Entities

Starting with Version 4.5, TPC groups all drawing objects by layers. For instance, all the point symbols are on the layer ‘TPCSymbols’. If you do not specify traverse layer names or choose not to use them, TPC uses these entity layer names instead.

This is the method you would use to draft a site survey. You might have one drawing with the point descriptions turned on to help identify where the improvements are located. Then you might want to turn off all of the descriptions and just show the location of the buildings to the lot lines. Setting up layering based on entities can be a real help.


Combining Traverse and Entity Layers

You can combine the traverse layer name with the entity layers by including an asterisk “*” in the traverse layer name and turning on [X] Use Traverse Layers in the Settings dialog. The * is replaced by TPC's default layer names to form a new layers.  See Traverse Layers.

For example, if a traverse's layer name is UTILITY-*, the combined names would be

•UTILITY-TPCSymbols

•UTILITY-TPCLines

•UTILITY-TPCFills

•etc..

Here are some more examples using just the TPCSymbols layer:

Traverse layer name,  Combined layer name

LOTS-*                LOTS-TPCSymbols

*-LOTS                TPCSymbols-LOTS

(left blank)                      TPCSymbols


Separate Point Label Layers

By default, TPC places all the data for a point label into a single drawing object which is then exported as a single CAD entity.  This label information can include the point's name, description, elevation, coordinates, stationing and geodetic position.  This label is placed on the TPCPointLabels level.

However, you can also separate point label information onto separate layers.  See Point Label Layers.


Related Topics

Layers
 

 

 

 

Copyright © 2026 Traverse PC, Inc.