TPC can import CAD files like DXF, DWG and DGN into a drawing and can import DXF files into a survey.
Import Paper Space Objects
Turn this option on to import paper space objects.
Retain Drawing Extents
Turn this option on to retain the extents stored with the drawing when it is opened.
If you already have a drawing and are importing a CAD file into it, TPC retains the extents of the drawing in TPC.
Allow Scale for Unit Blocks
Some CAD programs assume that a block that is defined to be ‘1 unit or less wide and 1 unit or less high’ is always multiplied by the drawing scale. These blocks are called ‘Unit Blocks’ or sometimes ‘1X1’ blocks. The scale of any object that uses these blocks is always set to 1.0 since the unit block itself is multiplied by the drawing scale. By default, if TPC reads a scale for an object that references a unit block, it forces the unit block to become a regular block and the drawing scale is not applied.
Turn this option on to retain the unit block setting, forcing any object that references this block to be multiplied by both the object scale and the drawing scale.
Ignore Layers
Turn this option on to ignore the objects on the imported layers. Once imported, you can always Notice the layers via the Layers dialog.
Windows 95/98 allows a limited number of resources to be open at one time. Each object being imported onto a layer that is not ignored creates its own region, thereby using some of the limited resources. If you import a large drawing in Windows 95/98, you could run low on resources. Newer versions of Windows do not have this resource limitation.
Read Attributes
Turn this option On to read attributes from CAD blocks.
Some blocks include additional information useful to TPC. Point blocks, for instance, may contain X/Y/Z coordinate data or point labels.
Allow Block Flipping
Turn this option On to render flipped blocks.
Explode Unknown Hatching
If TPC does not have a corresponding hatch type, it can explode the hatching into its component entities. You could potentially end up with thousands of small objects.
Explode Unknown Geometry
If TPC does not have a corresponding entity (drawing object), it can explode the entity into its component entities. This option can potentially create a lot of small drawing objects.
Hide 0,0 Position Entities
When you turn this option on (Default = On), TPC evaluates the position of imported entities. If the position is X=0.0 and Y=0.0, TPC hides that object in the Drawing View.
Hidden objects are not included in the Zoom Extents command. As a result, Zoom Extents can do a better job of isolating the model space you are interested in.
When this option is turned Off and you Zoom Extents on a drawing with entities at 0,0 position, TPC must included these objects in the drawing extents and scale. As a result, you will sometimes get a small blob of objects at 0,0 and another blob of objects at your survey location. If the two blobs of data are thousands or millions of units apart, you will need to resolve that situation before you can get a workable drawing.
In the Drawing Data Manager, hidden objects are listed on their layers, but their check box is un-checked. To see this objects, just check their boxes.
CAD Import: Hide Zero Position Entities (3:20) - Importing CAD files into TPC just got a whole lot better.
Tolerance
Consider two points to be the same if their coordinates are within the specified tolerance of each other. This is critical when determining if one line starts at the same point that another line ends at. In CAD, you may have drawn one line from the end point of another and while they look OK, they may actually have slightly different coordinate values.