|
TPC writes DXF and DWG files from the Export dialog box. DGN files use their own export settings.
You can use all of the graphics options to draw your survey, then write a copy of it to a DXF, DWG or DGN file.
•From the Drawing View, choose Tools | Export Drawing as. You will see the Export dialog.
•Enter a file name for the DXF / DWG file or choose Browse.
•Choose Settings, select the Export options you want and choose OK.
•From the Export dialog, choose Export.

3D Lines
Include the elevation of the endpoints of lines, arcs, polylines, etc.
Color by Layer
Set the attribute of the exported entities to derive their color from the layer they are on. In AutoCAD this is the BYLAYER setting.
Linetype by layer
Set the attribute of the exported entities to derive their line types from the layer they are on. In AutoCAD this is the BYLAYER setting.
Omit Text Style
When this option is on, TPC does not include a STYLE table in the DXF header and does not include the font style attribute (7) with TEXT entities. Turn this option on if your CAD does not support True Type font names.
Omit Line Scale
When this option is on, TPC sets the LTScale to 1.0 for the exported drawing.
When this option is turned off, TPC sets the LTScale to the drawing scale.
Prior to 2004, TPC used drawing scale / 4.0 to get proper spacing on dashed lines. That reduction has not been used since 2004.
XREF / Block Scale
Include block and XREF scale factors (INSUNITS) in the drawing based on the coordinate units of the survey. AutoCAD uses this value to scale the exported DWG if it is inserted into another DWG as an XREF.
Survey Units
Turn this option on to include the survey's units (meters or feet) in the exported CAD file. Currently works only for DWG export.
If turned on, TPC checks to see if the survey has a Coordinate Reference System (CRS), and if the CRS exists and the survey's units are Feet, TPC uses the US Survey vs International foot settings of the CRS for the exported drawing units.
If turned off, TPC exports the drawing's units as undefined. As such, if this drawing is appending to an existing CAD drawing, it assumes the units of that existing CAD drawing.
Omit Paper Space Objects
Turn this option on to export just the Survey Space objects from the drawing. Paper Space objects will NOT be exported.
This is useful when you want to export what CAD calls model space objects only. These are the actual survey points, boundary lines, contours, etc. that have survey coordinates.
Write Symbol Blocks
Writes the point symbols to the DXF file as blocks. The block definitions are included in the header portion of the DXF file and INSERT is used in the entity section to specify the block name and location to use for a point symbol. This option cannot be used with the Entities Only option because it doesn't write the header section where the blocks are defined. Available only for DXF files.
When you write symbol blocks, you can snap to the insert point of the block in your CAD program, rotate and scale the block, etc.
If this option is turned off, TPC draws each block by drawing the entities (lines, arcs, circles, etc) within the block. A tick mark would be drawn as two lines, with the intersection of the lines being the position of the point.
Some programs, like Microsoft Word 6.0, include DXF file filters that read DXF files but do not accept blocks in DXF files. If you insert blocks and read the DXF file into a program like this, you will not get any point symbols. In these situations, you must turn off the [ ] Write symbol blocks options and let TPC draw each symbol with the individual line, circle and arc entities that make up the block.
Entities Only
Turn this option on to write just the entity section of the DXF file. TPC does not include any header information with the DXF file. Available only for DXF files.
You may need to use this option if you get an error when reading a DXF file into your CAD program.
Use Traverse Layers
Use the traverse layer names to build the layer names used in the CAD file. See the discussion on layers below.
Left-Baseline Text
TPC uses text alignment values (Top-Left, Top-Center, Bottom-Right) etc to position text in a drawing. If your CAD program does not support these text alignments, it may draw the imported text horizontally or not at all. Available only for DXF files.
To accommodate this, TPC can compute the insert point that corresponds to the Left-Baseline position of the text. Using this option, TPC writes only the position and the text angle to the DXF file. This option is important for older versions of Design CAD and Generic CAD.
Entities on Page Only
Beginning in TPC Desktop 2011, you can choose to export only those entities that are at least partially on the page.
When this option is turned Off, TPC exports the entire survey, what CAD would call the 'Model Space'.
When this option is turned On, only those entities that are part of this drawing are exported.
Preview after export
Open the exported CAD file in your default CAD viewer. You can also just open it in the CAD View (available back in the Export dialog next to Preview).
Text height export factor
TPC tries to set the text height and compression (width) of exported text so that what you get in CAD matches what you see in TPC's drawing. However, not all fonts work the same.
If you experience exported CAD text that doesn't word wrap the same because it is too big, consider reducing this factor and exporting again.
Scaling the CAD File
In other CAD programs, text size is a factor of the drawing height. This means that as you scale the drawing, the text size changes. Often times, you then have to rescale individual text because it got too big or too small.
TPC eliminates this problem by factoring the text size for you when it writes the DXF file. The DXF file will be written so that when plotted in CAD at the same scale selected in Drawing View, the text size will be the same as it was in Drawing View.
Export Layer Options
TPC creates layers based on entity layer names, traverse layer names or both through the use of [X] Use Traverse Layers and the optional layer named stored with each traverse.
Bentley DGN files use the term Levels, but they work the same as AutoCAD's Layers for exporting layer names.
See Export Layer Options.
Related Topics
Using DXF Using DWG Layers Working with Drawing Objects Converting Drawing Objects to Survey Points
|