|
You may edit your Initial and Closing Points using this option. Typically, this is used in conjunction with either a Closed Loop or Closed Point to Point Traverse.

To report the Traverse Length between any two points, choose Open from the Closure Type tab and edit the Closing Points.
The Closing Points dialog will appear in two different formats depending on what Closure Type you have selected. If you choose Closed Loop or Open, you will be able to specify the Initial Point and the Closing Point. If you have selected Closed Point-to-Point, in addition to specifying an Initial Point and a Closing Point, you can also specify the point label, which defines the correct closing coordinates or just type in the correct coordinate values.
From
This point specifies the initial coordinates which subsequent data entry will be based on. The Initial Point does not have to be the first point in a traverse. As an example, if you have recalled two existing points that are used to initiate a new traverse, the second point in the traverse would be designated as the Initial Point.
To
This point specifies the known point that you have physically tied in your field traverse. Remember that even though this point already has a point label from a prior traverse, you must assign a unique point label to the closing point based on the current traverse.
The Closing Point may or may not be the last point in the traverse.
Point, Y, X, Z
These options are only available with Closed Point-to-Point closure type.
Enter the correct coordinates for the designated closing point. The actual coordinate values can be entered or you can specify the point label of the correct point.
Note: Only those traverse points that fall between the specified Initial Point and the specified Closing Point will be adjusted.
OK
Click this button to apply your changes and return to the Closure View.
Cancel
Click this button to return to the Closure View without applying your changes.
Related Topics
Closing Angle Closing Points Closure View
|