|
Use this dialog to move points into traverses based on their Point Codes. TPC calls this Sorting Points by Code.

What
Use the pull down list to select which survey points to sort into traverses.
The default is Entire Survey, but you can limit it to one or more traverses and one or more survey points.
Find
These options determine how TPC identifies point codes
Exact match
Only accept exact matches when looking for codes in point descriptions. The point description 'BL1' would not be an exact match for the code 'BL'.
With this option turned off, the ‘BL1’ description would be a match for the ‘BL’ code and it would be sorted into the ‘BL’ traverse.
Case sensitive
Treat upper and lower case letters as being different. The code 'BL' does not find a match in the point description 'bl'.
With this option turned off, the code ‘BL’ would find a match in the point description ‘bl’.
First word in point description is a code
Turn this option on to treat the first word in a point description as a code (this is the default setting). When turned on, the point description 'OAK 14"DBH' will return 'OAK' as a code.
With this option turned off, the point description 'OAK 14"DBH' will not return any code but the point description 'OAK--14"DBH' would return ‘OAK’ as a code and ‘14"DBH’ as a second code (as long as ‘—‘ is the default code delimiter). If a description does not return a code, the point will not be sorted into a traverse.
Note: The default code delimiter can be set in the Point Codes Manager Settings dialog box (from any view choose Tools | Program Settings and left click the Point Code tab) but the delimiter for a single survey can be changed at any time in the Update Codes Dialog.
Code Variants like SW1, SW2, SW3
These settings determine how TPC handles any code variants it finds. See Point Code Variants.
The two options are mutually exclusive. Turning one of them on, turns the other one off, but both can be turned off, in which case, all the variants will be added to a single traverse (created from their shared code) but without any GAPs between the variants.
[ ] Create a separate traverse for each
When turned on, TPC creates a separate traverse for each variant, using the point code settings of the shared point code to create the traverses. As such, traverses created for variants will appear the same in the drawing until you modify them.
[ ] Combine in Single traverse with GAPS
All the variants will be added to the traverse created from their shared point code, but TPC will insert GAP points when the variant changes within the traverse sequence.
Update Survey Points
When sorting points into traverses, the following options modify the point description where the code is stored.
The first two options are mutually exclusive. TPC can do one or the other, but not both. The third option can be combined with either of the first two.
Append code descriptions
This option copies the code description into the point description.
The point description 'CL' would become 'CL Center Line', where 'Center Line' is the description of the 'CL' code.
With this option turned off, the description ‘CL’ remains unchanged.
Replace codes with code descriptions
This option replaces the point code in the point description with the code description.
The point description 'CL' would become 'Center Line', where 'Center Line' is the description of the 'CL' code.
With this option turned off, the description ‘CL’ remains unchanged.
Replace description or attribute with code
This option replaces the entire point description with the code.
The point description 'CL other text' would become just 'CL'.
It then executes the Copy or Replace option above, if one or the other is turned on. If the Copy option is also turned on, the point description would become 'CL Center Line'. If the Replace option is also turned on, the point description would become 'Center Line'.
New Traverses
These options allow you to add point code descriptions to traverses created by point codes. You can append them to code for the traverse name, add them to the traverse description, or both.
The code name is always used for the traverse name.
[ ] Add code description to traverse name
When turned on, code descriptions, if present, are appended to the code using the format [code]-[description].
For example, if the point code BLDG with a description of Building were to create a traverse, that traverse name would be BLDG-Building.
[ ] Add code description to traverse description
When turned on, code descriptions are added to traverse descriptions. Traverse descriptions can be displayed in the Traverse Manager or traverse Properties dialog. See Traverse Properties.
Update existing traverses only
This option only updates traverses that already exist. When this option is turned on, new traverses are not created, but new survey points are still added to existing traverses created from their point codes.
With this option turned off, traverses will be created as needed for all codes sorted. Existing traverses will be updated.
Note: Prior to Version 5.0, traverses did not store the Point Code used to create them. As a result, these traverses cannot be updated unless you manually enter their point code. To do this, include the letter ‘C’ in the Traverses Manager format to include the ‘Point Code’ column and enter the appropriate codes for each traverse you want updated.
Look In
Descriptions - finds codes in point descriptions
Attributes - finds codes in point attributes
Sort What
Choose which codes you want to create traverses for.
All will sort all of the codes listed in the Point Codes Manager.
Selected will sort only the codes that were selected in the Point Codes Manager before sorting points into traverses.
Tagged will sort only the codes that were tagged in the Point Codes Manager before sorting points into traverses.
Related Topics
Point Codes
Editions
Premium, Professional
|