|
You can change the format used to display point and line labels in Plan mode.

Format
Specify a point label format using the letters in the Choose From box below.
Use quotes to include literal text in a label. For example, 'Radius='R will add Radius=56.00 where the letter R will be replaced with the radius value.
Default point label format: P\D\Z\Y/X\N\y/x
Hold
Select a corner of the point label to hold, relative to the survey position of the point. This corner anchors the label, allowing the label to grow away from the anchor to display all the label information you have selected (Label, Description, Stations, etc).
By default, TPC sets the hold value to Lower Left, so the point label is drawn above and to the right of the point and is left justified.
Text justification changes with the hold selection. If you hold the left side of the label, it is left justified. If you select an option which holds the right side of the label, the text is right justified.
Additional Label Offset
TPC adds any offset you specify here to the drawing's label offset in both the X and Y directions. The direction of the offsets, up / down / left / right depends on the Hold corner selected. In each case, a positive offset moves the label farther away from the point.
Copy To Drawing Settings
Use this buttons to copy the formats displayed here to the drawing. These will become the default label formats for the drawing. This gives you an additional opportunity to use consistent labeling within a drawing.
Use Drawing Formats
Turn this on to
•copy the drawing's label format into this dialog
•remove any label formats stored with this traverse or point code, forcing it to use the drawing's corresponding label format instead.
This forces the drawing's label formats to be used by default.
When you turn this option off, TPC stores the current label formats with the traverse or point code, using the stored label to format labels for this traverse or point code.
Reset to Program Defaults
This option copies TPC's corresponding default label format into this drawing.
Use this option if you simply want to reset the label formats to the way they were when you first installed TPC.
Related Topics
Labeling Points
Editions
Personal, Premium, Professional
|