TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD >

Drawing Traverses

 

 

 

 

Traverses are drawn based on their point sequences and Traverse Drawing Settings. 


Drawing Efficiently in TPC

This is a key part of TPC's Quick View™ Technology.  To take advantage of Quick View™ and draw efficiently in TPC, you will want to use traverses created with the right point sequences and understand how Traverse Drawing Settings and Object Settings work.

Traverse Point Sequence

TPC uses Control Point Settings to drawing control lines and sideshot settings to draw sideshots and offsets.  So you can think of using traverses to create figures in a drawing.  Recalling the right points in the right sequence into a traverse can represent pretty much any feature you need to show on a drawing.

Then you just tag the traverses you want to include in a drawing and TPC draws them for you, creating all the drawing objects (like CAD's entities) on their appropriate layers.

 

Recalling Points to Draw Lines (5:22) - A basic concept in TPC's Quick View technology is to recall points to create the line work.

Traverse Drawing Settings vs Object Settings (Properties)

Let TPC generate all your point symbols, point labels, lines, line labels, lot labels, location labels, hatching, smoothing, etc.  they modify the ones that are unique from the rest using their individual object properties (right-click and choose Properties).  See Traverse Drawing Settings vs Object Settings.


Control Points

Control point lines are drawn using the Control Point Settings, from the first control point in the traverse to the next control point, then the next control point, etc. until the end of the traverse is reached.

You can create gaps in this sequence by inserting a gap into the traverse or right clicking a control line in a drawing and choosing Gap. You can also hide control lines you don't want to see.

Control points have a point type of FS (Fore Sight) or blank for occupied point.

Control points also include alignment point types like PC (Point of Curvature), PT (Point of Tangency), PI (Point of Intersection), TS (Tangent to Spiral), SC (Spiral to Curve), CS (Curve to Spiral), ST (Spiral to Tangent).

Backsights

Backsights are not included with the control points by default, but can be included by turning on [x] Drawing Backsights (using Control Point Settings) in the Advanced tab of the Traverse Drawing Settings.

Draw Control Point Chain

When importing data from a total station, you may want to change the way TPC draws occupied points and backsights to more accurately represent how you set up in the field.

To turn this option on, in the Traverse View, choose Tools, Draw Control Point Chain.  See Drawing a Control Point Chain.

Control Polylines and Smoothing

TPC can draw control lines for any traverse as a single, continuous, polyline.  Instead of individual line segments for each traverse course, TPC draws just one single polyline, formatted to match the traverse's tangents, arcs and spirals.  See Drawing Control Points as a Polyline.

If you choose to draw a traverse as a polyline, you can also smooth it.  This is helpful when representing natural boundaries like lake shores.  See Traverse Smoothing.


Side Shots

Points with a point type SS (Side Shot), OFS (Offset), OFX (Cross-Section) are drawn using the Side Shot settings.

Lines to these points originate from their control point and end at the side shot.  They do not continue on from the side shot to any other point.  See Drawing Side Shots.


Point Symbols and Labels

In TPC drawings, you let TPC draw all the point symbols.  See Drawing Points (Symbols).  Then you modify individual point symbols as needed by right clicking them and choosing Properties.  See Traverse Drawing Settings vs Object Settings.

Survey Point Properties

Point symbols are a bit unique in that the survey point can override the symbol, size and rotation used to represent a survey point in all drawings.  See Survey Point Properties and selecting the Symbols tab.

Point Labels

In TPC drawings, you let TPC draw all the point labels.  See Labeling Points. 

Often times, you will leave point labels on while you are working on your survey, then simply turn off the TpcPointLabels layer in the drawing when you finish it.  The point labels will still be there if you need them in the future, they just won't be included when you deliver the drawing.


Lines and Labels

You will want to let TPC draw all the lines and labels, then change the properties of individual lines and move the line labels around as needed.  See Traverse Drawing Settings vs Object Settings.

Control points and side shots determine what lines are drawn and how they are labeled.  Each has their own line type, thickness, color and label options.  See Drawing Control Points, Drawing Side Shots and  Labeling Traverse Lines.

You can easily add your own line work and often will to add small features like a deck to a drawing.  TPC has all the tools do manually draw and label lines, but you will get the best results by letting traverses do the work for you.


Lot, Parcel and Feature Labels

You will want to let TPC label all the lots and parcels in a drawing and most of the features.  See Labeling Lots, Parcels and Features.

We just listed Lots, Parcels and Features, but any traverse can have a label.  So you can also label streets, easements, pools, ponds, vegetation area, etc..  Any traverse can label itself.

For closed loop traverses, TPC computes the center of the lot, parcel or feature and places the lot labels there, organizing them so that the name, area and location labels all fit nicely with each other.

The Traverse Name

TPC uses the traverse name as the default lot label.  So a traverse named Lot 1 produces the label Lot 1 and a road named Cooper Lane produces the label Cooper Lane.  Of course, one the lot label is created, you can modify it to say anything you want, but once again, it's best to let the traverses do the work for you.


Traverse Opacity

You can also change the opacity of one or more traverses in a drawing, helping you bring focus to certain parts of a drawing, like the property being surveyed instead of the adjacent lots.


Related Topics

Traverses
Traverse View
Traversing
 

 

 

 

Copyright © 2026 Traverse PC, Inc.